From a6ed1742539c62186fb903017b52dd48f145ae4f Mon Sep 17 00:00:00 2001
From: Vasil Zlatanov <v@skozl.com>
Date: Wed, 3 May 2017 16:30:16 +0100
Subject: Add template and build environment.

---
 ext/BusIn.h | 98 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 98 insertions(+)
 create mode 100644 ext/BusIn.h

(limited to 'ext/BusIn.h')

diff --git a/ext/BusIn.h b/ext/BusIn.h
new file mode 100644
index 0000000..a6d75ec
--- /dev/null
+++ b/ext/BusIn.h
@@ -0,0 +1,98 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSIN_H
+#define MBED_BUSIN_H
+
+#include "platform.h"
+#include "DigitalIn.h"
+
+namespace mbed {
+
+/** A digital input bus, used for reading the state of a collection of pins
+ */
+class BusIn {
+
+public:
+    /* Group: Configuration Methods */
+
+    /** Create an BusIn, connected to the specified pins
+     *
+     * @param <n> DigitalIn pin to connect to bus bit <n> (p5-p30, NC)
+     *
+     * @note
+     *  It is only required to specify as many pin variables as is required
+     *  for the bus; the rest will default to NC (not connected)
+     */
+    BusIn(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+          PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+          PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+          PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+    BusIn(PinName pins[16]);
+
+    virtual ~BusIn();
+
+    /** Read the value of the input bus
+     *
+     *  @returns
+     *   An integer with each bit corresponding to the value read from the associated DigitalIn pin
+     */
+    int read();
+
+    /** Set the input pin mode
+     *
+     *  @param mode PullUp, PullDown, PullNone
+     */
+    void mode(PinMode pull);
+
+    /** Binary mask of bus pins connected to actual pins (not NC pins)
+     *  If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1
+     *
+     *  @returns
+     *    Binary mask of connected pins
+     */
+    int mask() {
+        return _nc_mask;
+    }
+
+#ifdef MBED_OPERATORS
+    /** A shorthand for read()
+     */
+    operator int();
+
+    /** Access to particular bit in random-iterator fashion
+     */
+    DigitalIn & operator[] (int index);
+#endif
+
+protected:
+    DigitalIn* _pin[16];
+
+    /** Mask of bus's NC pins
+     * If bit[n] is set to 1 - pin is connected
+     * if bit[n] is cleared - pin is not connected (NC)
+     */
+    int _nc_mask;
+
+    /* disallow copy constructor and assignment operators */
+private:
+    BusIn(const BusIn&);
+    BusIn & operator = (const BusIn&);
+};
+
+} // namespace mbed
+
+#endif
-- 
cgit v1.2.3-54-g00ecf