# Introduction In this coursework we present two variants of the GAN architecture - DCGAN and CGAN, applied to the MNIST dataaset and evaluate performance metrics across various optimisations techniques. The MNIST dataset contains 60,000 training images and 10,000 testing images of size 28x28, spread across ten classes representing the ten handwritten digits. ## GAN Generative Adversarial Networks present a system of models which learn to output data, similar to training data. A trained GAN takes noise as an input and is able to provide an output with the same dimensions and ideally features as the samples it has been trained with. GAN's employ two neural networks - a *discriminator* and a *generator* which contest in a zero-sum game. The task of the *discriminator* is to distinguish generated images from real images, while the task of the generator is to produce realistic images which are able to fool the discriminator. ### Mode Collapse Training a shallow GAN with no convolutional layers poses multiple problems: mode collapse and generating low quality images due to unbalanced G-D losses. Mode collapse can be observed in figure \ref{fig:mode_collapse}, after 200.000 iterations of the GAN network **presented in appendix XXX**. The output of the generator only represents few of the labels originally fed. At that point the loss function of the generator stops improving as shown in figure \ref{fig:vanilla_loss}. We observe, the discriminator loss tentding to zero as it learns ti classify the fake 1's, while the generator is stuck producing 1's. \begin{figure} \begin{center} \includegraphics[width=24em]{fig/generic_gan_loss.png} \caption{Shallow GAN D-G Loss} \label{fig:vanilla_loss} \end{center} \end{figure} \begin{figure} \begin{center} \includegraphics[width=24em]{fig/generic_gan_mode_collapse.pdf} \caption{Shallow GAN mode collapse} \label{fig:mode_collapse} \end{center} \end{figure} A significant improvement to this vanilla architecture is Deep Convolutional Generative Adversarial Networks (DCGAN). # DCGAN ## DCGAN Architecture description DCGAN exploits convolutional stride to perform downsampling and transposed convolution to perform upsampling. We use batch normalization at the output of each convolutional layer (exception made for the output layer of the generator and the input layer of the discriminator). The activation functions of the intermediate layers are `ReLU` (for generator) and `LeakyReLU` with slope 0.2 (for discriminator). The activation functions used for the output are `tanh` for the generator and `sigmoid` for the discriminator. The convolutional layers' output in the discriminator uses dropout before feeding the next layers. We noticed a significant improvement in performance, and estimated an optimal droput rate of 0.25. The optimizer used for training is `Adam(learning_rate=0.002, beta=0.5)`. The main architecture used can be observed in figure \ref{fig:dcganarc}. \begin{figure} \begin{center} \includegraphics[width=24em]{fig/DCGAN_arch.pdf} \caption{DCGAN Architecture} \label{fig:dcganarc} \end{center} \end{figure} ## Tests on MNIST We propose 3 different architectures, varying the size of convolutional layers in the generator, while retaining the structure proposed in figure \ref{fig:dcganarc}: \begin{itemize} \item Shallow: Conv128-Conv64 \item Medium: Conv256-Conv128 \item Deep: Conv512-Conv256 \end{itemize} \begin{figure} \begin{center} \includegraphics[width=24em]{fig/short_dcgan_ex.pdf} \includegraphics[width=24em]{fig/short_dcgan.png} \caption{Shallow DCGAN} \label{fig:dcshort} \end{center} \end{figure} \begin{figure} \begin{center} \includegraphics[width=24em]{fig/med_dcgan_ex.pdf} \includegraphics[width=24em]{fig/med_dcgan.png} \caption{Medium DCGAN} \label{fig:dcmed} \end{center} \end{figure} \begin{figure} \begin{center} \includegraphics[width=24em]{fig/long_dcgan_ex.pdf} \includegraphics[width=24em]{fig/long_dcgan.png} \caption{Deep DCGAN} \label{fig:dclong} \end{center} \end{figure} It is possible to notice that using deeper architectures it is possible to balance G-D losses more easilly. Medium DCGAN achieves a very good performance, balancing both binary cross entropy losses ar around 1 after 5.000 epochs, showing significantly lower oscillation for longer training even when compared to Deep DCGAN. Since we are training with no labels, the generator will simply try to output images that fool the discriminator, but do not directly map to one specific class. Examples of this can be observed for all the output groups reported above as some of the shapes look very odd (but smooth enough to be labelled as real). This specific issue is solved by training the network for more epochs or introducing a deeper architecture, as it can be deducted from a qualitative comparison between figures \ref{fig:dcshort}, \ref{fig:dcmed} and \ref{fig:dclong}. While training the different proposed DCGAN architectures, we did not observe mode collapse, confirming that the architecture used performed better than the simple GAN presented in the introduction. Applying Virtual Batch Normalization on Medium DCGAN does not provide observable changes in G-D balancing, but reduces within-batch correlation. Although it is difficult to qualitatively assess the improvements, figure \ref{fig:} shows results of the introduction of this technique. # CGAN ## CGAN Architecture description ## Tests on MNIST Try **different architectures, hyper-parameters**, and, if necessary, the aspects of **one-sided label smoothing**, **virtual batch normalization**, balancing G and D. Please perform qualitative analyses on the generated images, and discuss, with results, what challenge and how they are specifically addressing. Is there the **mode collapse issue?** # Inception Score ## Classifier Architecture Used ## Results Measure the inception scores i.e. we use the class labels to generate images in CGAN and compare them with the predicted labels of the generated images. Also report the recognition accuracies on the MNIST real testing set (10K), in comparison to the inception scores. **Please measure and discuss the inception scores for the different hyper-parameters/tricks and/or architectures in Q2.** We measure the performance of the considered GAN's using the Inecption score [-inception], as calculated with L2-Net logits. $$ \textrm{IS}(x) = \exp(\mathcal{E}_x \left( \textrm{KL} ( p(y\|x) \|\| p(y) ) \right) ) $$ GAN type Inception Score (L2-Net) MNIST(ref) 9.67 cGAN 6.01 cGAN+VB 6.2 cGAN+LS 6.3 cGAN+VB+LS 6.4 cDCGAN+VB 6.5 cDCGAN+LS 6.8 cDCGAN+VB+LS 7.3 # Re-training the handwritten digit classifier ## Results Retrain with different portions and test BOTH fake and real queries. Please **vary** the portions of the real training and synthetic images, e.g. 10%, 20%, 50%, and 100%, of each. ## Adapted Training Strategy *Using even a small number of real samples per class would already give a high recognition rate, which is difficult to improve. Use few real samples per class, and, plenty generated images in a good quality and see if the testing accuracy can be improved or not, over the model trained using the few real samples only. Did you have to change the strategy in training the classification network in order to improve the testing accuracy? For example, use synthetic data to initialise the network parameters followed by fine tuning the parameters with real data set. Or using realistic synthetic data based on the confidence score from the classification network pre-trained on real data. If yes, please then specify your training strategy in details. Analyse and discuss the outcome of the experimental result.* # Bonus This is an open question. Do you have any other ideas to improve GANs or have more insightful and comparative evaluations of GANs? Ideas are not limited. For instance, \begin{itemize} \item How do you compare GAN with PCA? We leant PCA as another generative model in the Pattern Recognition module (EE468/EE9SO29/EE9CS729). Strengths/weaknesses? \item Take the pre-trained classification network using 100% real training examples and use it to extract the penultimate layer’s activations (embeddings) of 100 randomly sampled real test examples and 100 randomly sampled synthetic examples from all the digits i.e. 0-9. Use an embedding method e.g. t-sne [1] or PCA, to project them to a 2D subspace and plot them. Explain what kind of patterns do you observe between the digits on real and synthetic data. Also plot the distribution of confidence scores on these real and synthetic sub-sampled examples by the classification network trained on 100% real data on two separate graphs. Explain the trends in the graphs. \item Can we add a classification loss (using the pre-trained classifier) to CGAN, and see if this improve? The classification loss would help the generated images maintain the class labels, i.e. improving the inception score. What would be the respective network architecture and loss function? \end{itemize} # References
\newpage # Appendix