add vim folder

7 files changed, 754 insertions, 0 deletions

diff --git a/vim/doc/DrawIt.txt b/vim/doc/DrawIt.txt
new file mode 100644
index 0000000..8e72f64
--- /dev/null
+++ b/vim/doc/DrawIt.txt
@@ -0,0 +1,489 @@
+DrawIt.txt*	The DrawIt Tool				Nov 25, 2013
+
+Authors:  Charles E. Campbell  <NdrchipO@ScampbellPfamily.AbizM>
+          Sylvain Viart             <molo@multimania.com>
+	  (remove NOSPAM from Campbell's email first)
+Copyright:    Copyright (C) 2004-2013 Charles E. Campbell
+	      Permission is hereby granted to use and distribute this code,
+	      with or without modifications, provided that this copyright
+	      notice is copied with it. Like anything else that's free,
+	      DrawIt.vim and DrawItPlugin.vim are provided *as is*; it comes
+	      with no warranty of any kind, either expressed or implied. By
+	      using this plugin, you agree that in no event will the copyright
+	      holder be liable for any damages resulting from the use of this
+	      software.
+
+
+==============================================================================
+1. Contents						*drawit-contents* {{{1
+
+	1. Contents......................: |drawit-contents|
+	2. DrawIt Manual.................: |drawit|
+	3. DrawIt Usage..................: |drawit-usage|
+	     Starting....................: |drawit-start|
+	     Stopping....................: |drawit-stop|
+	     User Map Protection.........: |drawit-protect|
+	     Drawing.....................: |drawit-drawing|
+	     Tip.........................: |drawit-tip|
+	     Changing Drawing Characters.: |drawit-setdrawit|
+	     Moving......................: |drawit-moving|
+	     Erasing.....................: |drawit-erase|
+	     Example.....................: |drawit-example|
+	     Visual Block Mode...........: |drawit-visblock|
+	     Brushes.....................: |drawit-brush|
+	     DrawIt Modes................: |drawit-modes|
+	4. DrawIt History................: |drawit-history|
+
+
+==============================================================================
+2. DrawIt Manual					*drawit* {{{1
+							*drawit-manual*
+ /===============+============================================================\
+ || Starting &   |                                                           ||
+ || Stopping     | Explanation                                               ||
+ ++--------------+-----------------------------------------------------------++
+ ||  \di         | start DrawIt                     |drawit-start|             ||
+ ||  \ds         | stop  DrawIt                     |drawit-stop|              ||
+ ||  :DIstart    | start DrawIt                     |drawit-start|             ||
+ ||  :DIstart S  | start DrawIt in single-bar mode  |drawit-start|             ||
+ ||  :DIstart D  | start DrawIt in double-bar mode  |drawit-start|             ||
+ ||  :DIsngl     | start DrawIt in single-bar mode  |drawit-start| |drawit-sngl| ||
+ ||  :DIdbl      | start DrawIt in double-bar mode  |drawit-start| |drawit-dbl|  ||
+ ||  :DIstop     | stop  DrawIt                     |drawit-stop|              ||
+ ||  :DrawIt[!]  | start/stop DrawIt                |drawit-start| |drawit-stop| ||
+ ||              |                                                           ||
+ ++==============+===========================================================++
+ ||   Maps       | Explanation                                               ||
+ ++--------------+-----------------------------------------------------------++
+ ||              | The DrawIt routines use a replace, move, and              ||
+ ||              | replace/insert strategy.  The package also lets one insert||
+ ||              | spaces, draw arrows by using the following characters or  ||
+ ||              | keypad characters:                                        ||
+ ||              +-----------------------------------------------------------++
+ || <left>       | move and draw left                         |drawit-drawing| ||
+ || <right>      | move and draw right, inserting lines/space as needed      ||
+ || <up>         | move and draw up, inserting lines/space as needed         ||
+ || <down>       | move and draw down, inserting lines/space as needed       ||
+ || <s-left>     | move cursor left                              |drawit-move| ||
+ || <s-right>    | move cursor right, inserting lines/space as needed        ||
+ || <s-up>       | move cursor up, inserting lines/space as needed           ||
+ || <s-down>     | move cursor down, inserting lines/space as needed         ||
+ || <space>      | toggle into and out of erase mode                         ||
+ || >            | insert a > and move right    (draw -> arrow)              ||
+ || <            | insert a < and move left     (draw <- arrow)              ||
+ || ^            | insert a ^ and move up       (draw ^  arrow)              ||
+ || v            | insert a v and move down     (draw v  arrow)              ||
+ || <pgdn>       | replace with a \, move down and right, and insert a \     ||
+ || <end>        | replace with a /, move down and left,  and insert a /     ||
+ || <pgup>       | replace with a /, move up   and right, and insert a /     ||
+ || <home>       | replace with a \, move up   and left,  and insert a \     ||
+ || \>           | insert a fat > and move right    (draw -> arrow)          ||
+ || \<           | insert a fat < and move left     (draw <- arrow)          ||
+ || \^           | insert a fat ^ and move up       (draw ^  arrow)          ||
+ || \v           | insert a fat v and move down     (draw v  arrow)          ||
+ ||<s-leftmouse> | drag and draw with current brush            |drawit-brush|  ||
+ ||<c-leftmouse> | drag and move current brush                 |drawit-brush|  ||
+ ||              |                                                           ||
+ ||==============+===========================================================++
+ ||Visual Cmds   | Explanation                                               ||
+ ||--------------+-----------------------------------------------------------++
+ ||              | The drawing mode routines use visual-block mode to        ||
+ ||              | select endpoints for lines, arrows, and ellipses. Bresen- ||
+ ||              | ham and Bresenham-like algorithms are used for this.      ||
+ ||              |                                                           ||
+ ||              | These routines need a block of spaces, and so the canvas  ||
+ ||              | routine must first be used to create such a block.  The   ||
+ ||              | canvas routine will query the user for the number of      ||
+ ||              | lines to hold |'textwidth'| spaces.                         ||
+ ||              +-----------------------------------------------------------++
+ || \a           | draw arrow from corners of visual-block selected region   ||  |drawit-a|
+ || \b           | draw box on visual-block selected region                  ||  |drawit-b|
+ || \c           | the canvas routine (will query user, see above)           ||  |drawit-c|
+ || \e           | draw an ellipse on visual-block selected region           ||  |drawit-e|
+ || \f           | flood figure with a character (you will be prompted)      ||  |drawit-f|
+ || \l           | draw line from corners of visual-block selected region    ||  |drawit-l|
+ || \s           | spacer: appends spaces up to the textwidth (default: 78)  ||  |drawit-s|
+ ||              |                                                           ||
+ ++==============+===========================================================++
+ || Function and Explanation                                                 ||
+ ++--------------+-----------------------------------------------------------++
+ ||  :call SetDrawIt('vertical','horizontal','crossing','\','/','X','*')     ||
+ ||            set drawing characters for motions for moving                 ||
+ ||            and for the ellipse drawing boundary        |drawit-setdrawit|  ||
+ ||  default   motion                                                        ||
+ ||  |         up/down,                                                      ||
+ ||  -         left/right,                                                   ||
+ ||  +         -| crossing,                                                  ||
+ ||  \         downright,                                                    ||
+ ||  /         downleft, and                                                 ||
+ ||  X         \/ crossing                                                   ||
+ ++=======================+==================================================++
+ ||  Commands             | Explanation                                      ||
+ ++-----------------------+--------------------------------------------------++
+ ||  :SetBrush a-z        | sets brush (register) to given register          ||
+ ||  :'<,'>SetBrush a-z   | yanks visual block to brush      |drawit-brush|||    ||
+ ||  :DInrml              | switch to normal mode            |drawit-nrml|     ||
+ ||  :DIsngl              | switch to single-line mode       |drawit-sngl|     ||
+ ||  :DIdbl               | switch to double-line mode       |drawit-dbl|      ||
+ \============================================================================/
+
+
+==============================================================================
+3. DrawIt Usage						*drawit-usage* {{{1
+
+STARTING						*drawit-start* {{{2
+\di           (starts in normal     drawing mode)       *drawit-\di*
+:DrawIt       (starts in normal     drawing mode)       *drawit-DrawIt*
+:DIstart      (starts in normal     drawing mode)       *drawit-DIstart*
+:DIstart S    (starts in single-bar drawing mode)
+:DIstart D    (starts in double-bar drawing mode)
+:DInrml       (starts in normal     drawing mode)       *drawit-DInrml*
+:DIsngl       (starts in single-bar drawing mode)       *drawit-DIsngl*
+:DIdbl        (starts in double-bar drawing mode)       *drawit-DIdbl*
+
+Typically one puts <drawit.vim> into the .vim/plugin directory
+(vimfiles\plugin for Windows) where it becomes always available.  It uses a
+minimal interface (\di: you can think of it as *D*raw*I*t or *D*rawIt
+*I*nitialize) to start it and (\ds: *D*rawIt *S*top) to stop it.  Instead of
+using "\" you may specify your own preference for a map leader (see
+|mapleader|).
+
+With a trailing 'S', :DIstart will begin in single-bar mode (see |drawit-sngl|).
+With a trailing 'D', :DIstart will begin in double-bar mode (see |drawit-dbl|).
+Similarly, :DIsngl and :DIdbl will start DrawIt as well as begin in
+single-bar or double-bar mode, respectively.
+
+A message, "[DrawIt]", will appear on the message line.
+
+
+STOPPING						*drawit-stop* {{{2
+\ds
+:DIstop
+:DrawIt!
+
+When you are done with DrawIt, use \ds to stop DrawIt mode.  Stopping DrawIt
+will restore your usual options and remove the maps DrawIt set up.
+
+A message, "[DrawIt off]", will appear on the message line.
+
+						*drawit-utf16*
+						*drawit-utf8* *drawit-unicode*
+NORMAL, SINGLE BAR, AND DOUBLE BAR MODES	*drawit-sngl* *drawit-dbl*
+:DInrml  :DIsngl  :DIdbl
+
+One may use these commands to start up Drawit in normal, single-bar, or
+double-bar modes, respectively.  When your |'encoding'| is utf-8 or utf-16,
+DrawIt supports drawing with special box characters (single-bar, double_bar).
+These commands are also used to switch to normal, single-bar, or double-bar
+modes.
+
+
+USER MAP PROTECTION					*drawit-protect* {{{2
+
+Starting DrawIt causes it to set up a number of maps which facilitate drawing.
+DrawIt accommodates users with conflicting maps by saving both maps and user
+options and before setting them to what DrawIt needs.  When you stop DrawIt
+(|drawit-stop|), DrawIt will restore the user's maps and options as they were
+before DrawIt was started.
+
+
+OPTIONS                                               	*drawit-options* {{{2
+
+							*g:drawit_insertmode*
+g:drawit_insertmode : if this variable exists and is 1 then maps are
+	              made which make cursor-control drawing available
+		      while in insert mode, too.  Otherwise, DrawIt's
+		      maps only affect normal mode.
+
+DRAWING							*drawit-drawing* {{{2
+
+After DrawIt is started, use the number pad or arrow keys to move the cursor
+about.  As the cursor moves, DrawIt will then leave appropriate "line"
+characters behind as you move horizontally, vertically, or diagonally, and
+will transparently enlarge your file to accommodate your drawing as needed.
+The trail will consist of -, |, \, / characters (depending on which direction
+and SetDrawIt() changes), and + and X characters where line crossings occur.
+You may use h-j-k-l to move about your display and generally use editing
+commands as you wish even while in DrawIt mode.
+
+Another tool that may be used to convert Ascii-art into nice pictures is
+available at https://github.com/christiangoltz/shaape .
+
+
+CHANGING DRAWING CHARACTERS				*drawit-setdrawit* {{{2
+
+The SetDrawIt() function is available for those who wish to change the
+characters that DrawIt uses. >
+
+    ex. :call SetDrawIt('*','*','*','*','*','*','*')
+    ex. :call SetDrawIt('-','|','-','\','/','/','*')
+<
+The first example shows how to change all the DrawIt drawing characters to
+asterisks, and the second shows how to give crossing priority to - and /.
+The default setting is equivalent to: >
+
+	:call SetDrawIt('|','-','+','\','/','X','*')
+<
+where SetDrawit()'s arguments refer, in order, to the >
+
+	vertical			drawing character
+    	horizontal			drawing character
+    	horizontal/vertical crossing	drawing character
+    	down right			drawing character
+    	down left			drawing character
+    	diagonal crossing		drawing character
+	ellipse boundary                drawing character
+<
+
+TIP							*drawit-tip*
+
+I have found that sometimes one or more of the <home>, <end>, <pageup>,
+and <pagedown> keys give unique sequences but are not interpreted
+properly by Vim.  This problem impacts DrawIt as it uses those four
+keys to signify diagonal moves/drawing.  One solution I use is to
+put into my <.vimrc> file mapings like:
+
+	map ^V... <home>
+
+where the ellipsis (...) is the actual character sequence produced by
+hitting the key.  The way to generate such maps is to type "map ",
+followed by three control-v presses, press the associated key, then
+a space followed by the proper interpretation sequence (ie. <home>).
+
+
+MOVING					*drawit-move* *drawit-moving* {{{2
+
+DrawIt supports shifting the arrow keys to cause motion of the cursor.  The
+motion of the cursor will not modify what's below the cursor.  The cursor
+will move and lines and/or spaces will be inserted to support the move as
+required.  Your terminal may not support shifted arrow keys, however, or Vim
+may not catch them as such.  For example, on the machine I use, shift-up
+(<s-up>) produced <Esc>[161q, but vim didn't know that sequence was a <s-up>.
+I merely made a nmap:
+
+	nmap <Esc>[161q	<s-up>
+
+and vim thereafter recognized the <s-up> command.
+
+
+ERASING							*drawit-erase* {{{2
+<space>
+
+The <space> key will toggle DrawIt's erase mode/DrawIt mode.  When in [DrawIt
+erase] mode, a message "[DrawIt erase]" will appear and the number pad will
+now cause spaces to be drawn instead of the usual drawing characters.  The
+drawing behavior will be restored when the <space> key toggles DrawIt back
+to regular DrawIt mode.
+
+
+EXAMPLES						*drawit-example* {{{2
+
+Needless to say, the square spirals which follow were done with DrawIt and
+a bit of block editing with Vim: >
+
+   +------------ -----------+ +------------ -----------+ +------------
+   |+----------+ +---------+| |+----------+ +---------+| |+----------+
+   ||+--------+| |+-------+|| ||+--------+| |+-------+|| ||+--------+|
+   |||-------+|| ||+------||| |||-------+|| ||+------||| |||-------+||
+   ||+-------+|| ||+------+|| ||+-------+|| ||+------+|| ||+-------+||
+   |+---------+| |+--------+| |+---------+| |+--------+| |+---------+|
+   +-----------+ +----------+ +-----------+ +----------+ +-----------+
+
+VISUAL BLOCK MODE FOR ARROWS LINES BOXES AND ELLIPSES	*drawit-visblock* {{{2
+
+\a : draw arrow from corners of visual-block selected region	*drawit-a*
+\b : draw box on visual-block selected region			*drawit-b*
+\c : the canvas routine (will query user, see above)		*drawit-c*
+\e : draw an ellipse on visual-block selected region		*drawit-e*
+\f : flood figure with a character (you will be prompted)	*drawit-f*
+\l : draw line from corners of visual-block selected region	*drawit-l*
+\s : spacer: appends spaces up to the textwidth (default: 78)	*drawit-s*
+
+The DrawIt package has been merged with Sylvain Viart's drawing package (by
+permission) which provides DrawIt with visual-block selection of
+starting/ending point drawing of arrows (\a), lines (\l), and boxes (\b).
+Additionally I wrote an ellipse drawing function using visual block
+specification (|drawit-e|).
+
+One may create a block of spaces for these maps to operate in; the "canvas"
+routine (\c) will help create such blocks.  First, the s:Canvas() routine will
+query the user for the number of lines s/he wishes to have, and will then fill
+those lines with spaces out to the |'textwidth'| if user has specified it;
+otherwise, the display width will be used.
+
+Although most of the maps use visual-block selection, that isn't true of the
+\f map.  Instead, it assume that you have already drawn some closed figure
+and want to fill it with some character.
+
+The Sylvain Viart functions and the ellipse drawing function depend
+upon using visual block mode.  As a typical use: >
+
+	Example: * \h
+                   DrawIt asks: how many lines under the cursor? 10
+                   DrawIt then appends 10 lines filled with blanks
+                   out to textwidth (if defined) or 78 columns.
+                 * ctrl-v (move) \b
+                   DrawIt then draws a box
+		 * ctrl-v (move) \e
+                   DrawIt then draws an ellipse
+<
+Select the first endpoint with ctrl-v and then move to the other endpoint.
+One may then select \a for arrows, \b for boxes, \e for ellipses, or \l for
+lines.  The internal s:AutoCanvas() will convert tabs to spaces and will
+extend with spaces as needed to support the visual block.  Note that when
+DrawIt is enabled, virtualedit is also enabled (to "all").
+>
+        Examples:
+
+        __                _         ***************           +-------+
+          \_            _/      ****               ****       |       |
+            \_        _/      **      --------->       **     |       |
+              \_    _/          ****               ****       |       |
+                \__/   <-------     ***************           +-------+
+
+		\l        \a           \e and \a                  \b
+<
+							*drawit-setbrush*
+BRUSHES							*drawit-brush* {{{2
+>
+ :SetBrush [a-z]
+<
+	Set the current brush to the selected brush register:
+>
+		ex.  :SetBrush b
+
+ :'<,'>SetBrush [a-z]
+<
+	Select text for the brush by using visual-block mode: ctrl-v, move .
+	Then set the current text into the brush register:  (default brush: a)
+>
+ <leftmouse>
+<
+	Select a visual-block region.  One may use "ay, for example,
+	to yank selected text to register a.
+>
+ <shift-leftmouse>
+<
+	One may drag and draw with the current brush (default brush: a)
+	by holding down the shift key and the leftmouse button and moving
+	the mouse.  Blanks in the brush are considered to be transparent.
+>
+ <ctrl-leftmouse>
+<
+	One may drag and move a selection with <ctrl-leftmouse>.  First,
+	select the region using the <leftmouse>.  Release the mouse button,
+	then press ctrl and the <leftmouse> button; while continuing to press
+	the button, move the mouse.  The selected block of text will then
+	move along with the cursor.
+>
+ \ra ... \rz
+<
+	Replace text with the given register's contents (ie. the brush).
+>
+ \pa ... \pz
+<
+	Like \ra ... \rz, except that blanks are considered to be transparent.
+
+	Example: Draw the following >
+			\ \
+			o o
+			 *
+			---
+<		Then use ctrl-v, move, "ay to grab a copy into register a.
+		By default, the current brush uses register a (change brush
+		with :SetBrush [reg]).  Hold the <shift> and <leftbutton>
+		keys down and move the mouse; as you move, a copy of the
+		brush will be left behind.
+
+
+DRAWIT MODES						*drawit-modes* {{{2
+
+  -[DrawIt]       regular DrawIt mode                     (|drawit-start|)
+  -[DrawIt off]   DrawIt is off                           (|drawit-stop| )
+  -[DrawIt erase] DrawIt will erase using the number pad  (|drawit-erase|)
+
+  g:DrChipTopLvlMenu: by default its "DrChip"; you may set this to whatever
+                  you like in your <.vimrc>.  This variable controls where
+		  DrawIt's menu items are placed.
+
+
+==============================================================================
+4. History						*drawit-history* {{{1
+
+	13	Sep 05, 2013	* improved s:Strlen() -- now uses |strdisplaywidth()|
+				  if available.
+		Sep 13, 2013	* (Paul Wagland) found a case where lines were
+				  being drawn with the wrong character.  This
+				  affected the Bresenham-algorithm based
+				  drawing facility (ie. lines and arrows
+				  specified by visual blocks;
+				  |drawit-a|, |drawit-l|).
+	12	Nov 16, 2012	* (Alexandre Viau) arrows weren't being drawn.
+				  Fixed.
+		Nov 29, 2012	* (Kim Jang-hwan) reported that with
+				  g:Align_xstrlen set to 3 that the cursor was
+				  moved (linewise) after invocation.  This
+				  problem also afflicted DrawIt.  Fixed.
+	11	Jan 21, 2010	* (Evan Stern) several places were using
+				  hardcoded drawing characters instead of
+				  b:di_... equivalents.
+		Feb 22, 2011	* for menus, &go =~# used to insure correct case
+		Sep 22, 2011	* ctrl-leftmouse (see |drawit-brush|) now moves the
+				  selected text entirely, no longer leaving a copy
+				  of the text where it was initially.
+		Nov 07, 2011	* included support for utf-8 box drawing characters
+		Nov 16, 2011	* included support for utf-8 single-double characters
+		Nov 16, 2011	* included support for cp437 box drawing characters
+		Dec 06, 2011	* included support for box and line drawing (\b, \l)
+				  support for utf-8 / cp437 box drawing characters
+		Dec 06, 2011	* fat arrows now use utf-8 characters when available
+		Jan 30, 2012	* \f supported when using utf-8/cp437 box drawing
+				  characters as boundary characters
+	10	Jun 12, 2008	* Fixed a bug with ctrl-leftmouse (which was leaving
+				  a space in the original selected text)
+		Mar 24, 2009	* :DrawIt starts, :DrawIt! stops DrawIt mode.
+		Mar 24, 2009	* I've included <script> modifiers to the maps to
+				  cause rhs remapping only with mappings local to
+				  the script (see |:map-script|)
+	9	Sep 14, 2007	* Johann-Guenter Simon fixed a bug with s:DrawErase();
+				  it called SetDrawIt() and that call hadn't been
+				  updated to account for the new b:di_ellipse
+				  parameter.
+	8	Feb 12, 2007	* fixed a bug which prevented multi-character user
+				  maps from being restored properly
+		May 03, 2007	* Extended SetDrawIt() to handle b:di_ellipse, the
+				  ellipse boundary drawing character
+				* Changed "Holer" to "Canvas", and wrote AutoCanvas(),
+				  which allows one to use the visual-block drawing
+				  maps without creating a canvas first.
+				* DrawIt implements using the ctrl-leftmouse to move
+				  a visual-block selected region.
+				* Floods can now be done inside an ellipse
+				* DrawIt's maps are now all users of <buffer>
+	 7	Feb 16, 2005	* now checks that "m" is in &go before attempting to
+				  use menus
+		Aug 17, 2005	* report option workaround
+		Nov 01, 2005	* converted DrawIt to use autoload feature of vim 7.0
+		Dec 28, 2005	* now uses cecutil to save/restore user maps
+		Jan 18, 2006	* cecutil now updated to use keepjumps
+		Jan 23, 2006	* :DIstart and :DIstop commands provided; thus users
+				  using  "set noremap" can still use DrawIt.
+		Jan 26, 2006	* DrawIt menu entry now keeps its place
+		Apr 10, 2006	* Brushes were implemented
+	 6	Feb 24, 2003	* The latest DrawIt now provides a fill function.
+				  \f will ask for a character to fill the figure
+				  surrounding the current cursor location.  Plus
+				  I suggest reading :he drawit-tip for those whose
+				  home/pageup/pagedown/end keys aren't all working
+				  properly with DrawIt.
+		08/18/03	* \p[a-z] and \r[a-z] implemented
+		08/04/03	* b:..keep variables renamed to b:di_..keep variables
+				  StopDrawIt() now insures that erase mode is off
+		03/11/03	* included g:drawit_insertmode handling
+		02/21/03	* included flood function
+		12/11/02	* deletes trailing whitespace only if holer used
+		8/27/02		* fat arrowheads included
+				* shift-arrow keys move but don't modify
+
+ ---------------------------------------------------------------------
+vim:tw=78:ts=8:ft=help:fdm=marker
diff --git a/vim/doc/imaps.txt.gz b/vim/doc/imaps.txt.gz
new file mode 120000
index 0000000..cf5808b
--- /dev/null
+++ b/vim/doc/imaps.txt.gz
@@ -0,0 +1 @@
+/usr/share/vim/addons/doc/imaps.txt.gz
\ No newline at end of file
diff --git a/vim/doc/latex-suite-quickstart.txt.gz b/vim/doc/latex-suite-quickstart.txt.gz
new file mode 120000
index 0000000..5ef4db2
--- /dev/null
+++ b/vim/doc/latex-suite-quickstart.txt.gz
@@ -0,0 +1 @@
+/usr/share/vim/addons/doc/latex-suite-quickstart.txt.gz
\ No newline at end of file
diff --git a/vim/doc/latex-suite.txt.gz b/vim/doc/latex-suite.txt.gz
new file mode 120000
index 0000000..35c3d5a
--- /dev/null
+++ b/vim/doc/latex-suite.txt.gz
@@ -0,0 +1 @@
+/usr/share/vim/addons/doc/latex-suite.txt.gz
\ No newline at end of file
diff --git a/vim/doc/latexhelp.txt.gz b/vim/doc/latexhelp.txt.gz
new file mode 120000
index 0000000..f8197a0
--- /dev/null
+++ b/vim/doc/latexhelp.txt.gz
@@ -0,0 +1 @@
+/usr/share/vim/addons/doc/latexhelp.txt.gz
\ No newline at end of file
diff --git a/vim/doc/surround.txt b/vim/doc/surround.txt
new file mode 100644
index 0000000..30a642a
--- /dev/null
+++ b/vim/doc/surround.txt
@@ -0,0 +1,205 @@
+*surround.txt*  Plugin for deleting, changing, and adding "surroundings"
+
+Author:  Tim Pope <http://tpo.pe/>
+License: Same terms as Vim itself (see |license|)
+
+This plugin is only available if 'compatible' is not set.
+
+INTRODUCTION                                    *surround*
+
+This plugin is a tool for dealing with pairs of "surroundings."  Examples
+of surroundings include parentheses, quotes, and HTML tags.  They are
+closely related to what Vim refers to as |text-objects|.  Provided
+are mappings to allow for removing, changing, and adding surroundings.
+
+Details follow on the exact semantics, but first, consider the following
+examples.  An asterisk (*) is used to denote the cursor position.
+
+  Old text                  Command     New text ~
+  "Hello *world!"           ds"         Hello world!
+  [123+4*56]/2              cs])        (123+456)/2
+  "Look ma, I'm *HTML!"     cs"<q>      <q>Look ma, I'm HTML!</q>
+  if *x>3 {                 ysW(        if ( x>3 ) {
+  my $str = *whee!;         vllllS'     my $str = 'whee!';
+
+While a few features of this plugin will work in older versions of Vim,
+Vim 7 is recommended for full functionality.
+
+MAPPINGS                                        *surround-mappings*
+
+Delete surroundings is *ds* .  The next character given determines the target
+to delete.  The exact nature of the target is explained in |surround-targets|
+but essentially it is the last character of a |text-object|.  This mapping
+deletes the difference between the "i"nner object and "a"n object.  This is
+easiest to understand with some examples:
+
+  Old text                  Command     New text ~
+  "Hello *world!"           ds"         Hello world!
+  (123+4*56)/2              ds)         123+456/2
+  <div>Yo!*</div>           dst         Yo!
+
+Change surroundings is *cs* .  It takes two arguments, a target like with
+|ds|, and a replacement.  Details about the second argument can be found
+below in |surround-replacements|.  Once again, examples are in order.
+
+  Old text                  Command     New text ~
+  "Hello *world!"           cs"'        'Hello world!'
+  "Hello *world!"           cs"<q>      <q>Hello world!</q>
+  (123+4*56)/2              cs)]        [123+456]/2
+  (123+4*56)/2              cs)[        [ 123+456 ]/2
+  <div>Yo!*</div>           cst<p>      <p>Yo!</p>
+
+*ys* takes a valid Vim motion or text object as the first object, and wraps
+it using the second argument as with |cs|.  (It's a stretch, but a good
+mnemonic for "ys" is "you surround".)
+
+  Old text                  Command     New text ~
+  Hello w*orld!             ysiw)       Hello (world)!
+
+As a special case, *yss* operates on the current line, ignoring leading
+whitespace.
+
+  Old text                  Command     New text ~
+      Hello w*orld!         yssB            {Hello world!}
+
+There is also *yS* and *ySS* which indent the surrounded text and place it
+on a line of its own.
+
+In visual mode, a simple "S" with an argument wraps the selection.  This is
+referred to as the *vS* mapping, although ordinarily there will be
+additional keystrokes between the v and S.  In linewise visual mode, the
+surroundings are placed on separate lines and indented.  In blockwise visual
+mode, each line is surrounded.
+
+A "gS" in visual mode, known as *vgS* , behaves similarly.  In linewise visual
+mode, the automatic indenting is suppressed.  In blockwise visual mode, this
+enables surrounding past the end of the line with 'virtualedit' set (there
+seems to be no way in Vim Script to differentiate between a jagged end of line
+selection and a virtual block selected past the end of the line, so two maps
+were needed).
+
+                                                *i_CTRL-G_s* *i_CTRL-G_S*
+Finally, there is an experimental insert mode mapping on <C-G>s and <C-S>.
+Beware that the latter won't work on terminals with flow control (if you
+accidentally freeze your terminal, use <C-Q> to unfreeze it).  The mapping
+inserts the specified surroundings and puts the cursor between them.  If,
+immediately after the mapping and before the replacement, a second <C-S> or
+carriage return is pressed, the prefix, cursor, and suffix will be placed on
+three separate lines.  <C-G>S (not <C-G>s) also exhibits this behavior.
+
+TARGETS                                         *surround-targets*
+
+The |ds| and |cs| commands both take a target as their first argument.  The
+possible targets are based closely on the |text-objects| provided by Vim.
+All targets are currently just one character.
+
+Eight punctuation marks, (, ), {, }, [, ], <, and >, represent themselves
+and their counterparts.  If the opening mark is used, contained whitespace is
+also trimmed.  The targets b, B, r, and a are aliases for ), }, ], and > 
+(the first two mirror Vim; the second two are completely arbitrary and
+subject to change).
+
+Three quote marks, ', ", `, represent themselves, in pairs.  They are only
+searched for on the current line.
+
+A t is a pair of HTML or XML tags.  See |tag-blocks| for details.  Remember
+that you can specify a numerical argument if you want to get to a tag other
+than the innermost one.
+
+The letters w, W, and s correspond to a |word|, a |WORD|, and a |sentence|,
+respectively.  These are special in that they have nothing to delete, and
+used with |ds| they are a no-op.  With |cs|, one could consider them a
+slight shortcut for ysi (cswb == ysiwb, more or less).
+
+A p represents a |paragraph|.  This behaves similarly to w, W, and s above;
+however, newlines are sometimes added and/or removed.
+
+REPLACEMENTS                                    *surround-replacements*
+
+A replacement argument is a single character, and is required by |cs|, |ys|,
+and |vS|.  Undefined replacement characters (with the exception of alphabetic
+characters) default to placing themselves at the beginning and end of the
+destination, which can be useful for characters like / and |.
+
+If either ), }, ], or > is used, the text is wrapped in the appropriate pair
+of characters.  Similar behavior can be found with (, {, and [ (but not <),
+which append an additional space to the inside.  Like with the targets above,
+b, B, r, and a are aliases for ), }, ], and >.  To fulfill the common need for
+code blocks in C-style languages, <C-}> (which is really <C-]>) adds braces on
+lines separate from the content.
+
+If t or < is used, Vim prompts for an HTML/XML tag to insert.  You may specify
+attributes here and they will be stripped from the closing tag.  End your
+input by pressing <CR> or >.  If <C-T> is used, the tags will appear on lines
+by themselves.
+
+If s is used, a leading but not trailing space is added.  This is useful for
+removing parentheses from a function call with csbs.
+
+CUSTOMIZING                                     *surround-customizing*
+
+The following adds a potential replacement on "-" (ASCII 45) in PHP files.
+(To determine the ASCII code to use, :echo char2nr("-")).  The carriage
+return will be replaced by the original text.
+>
+  autocmd FileType php let b:surround_45 = "<?php \r ?>"
+<
+This can be used in a PHP file as in the following example.
+
+  Old text                  Command     New text ~
+  print "Hello *world!"     yss-        <?php print "Hello world!" ?>
+
+Additionally, one can use a global variable for globally available
+replacements.
+>
+  let g:surround_45 = "<% \r %>"
+  let g:surround_61 = "<%= \r %>"
+<
+Advanced, experimental, and subject to change:  One can also prompt for
+replacement text.  The syntax for this is to surround the replacement in pairs
+of low numbered control characters.  If this sounds confusing, that's because
+it is (but it makes the parsing easy).  Consider the following example for a
+LaTeX environment on the "l" replacement.
+>
+  let g:surround_108 = "\\begin{\1environment: \1}\r\\end{\1\1}"
+<
+When this replacement is used,  the user is prompted with an "environment: "
+prompt for input.  This input is inserted between each set of \1's.
+Additional inputs up to \7 can be used.
+
+Furthermore, one can specify a regular expression substitution to apply.
+>
+  let g:surround_108 = "\\begin{\1environment: \1}\r\\end{\1\r}.*\r\1}"
+<
+This will remove anything after the first } in the input when the text is
+placed within the \end{} slot.  The first \r marks where the pattern begins,
+and the second where the replacement text begins.
+
+Here's a second example for creating an HTML <div>.  The substitution cleverly
+prompts for an id, but only adds id="" if it is non-blank.  You may have to
+read this one a few times slowly before you understand it.
+>
+  let g:surround_{char2nr("d")} = "<div\1id: \r..*\r id=\"&\"\1>\r</div>"
+<
+Inputting text replacements is a proof of concept at this point. The ugly,
+unintuitive interface and the brevity of the documentation reflect this.
+
+Finally, It is possible to always append a string to surroundings in insert
+mode (and only insert mode).  This is useful with certain plugins and mappings
+that allow you to jump to such markings.
+>
+  let g:surround_insert_tail = "<++>"
+<
+ISSUES                                          *surround-issues*
+
+Vim could potentially get confused when deleting/changing occurs at the very
+end of the line.  Please report any repeatable instances of this.
+
+Do we need to use |inputsave()|/|inputrestore()| with the tag replacement?
+
+Indenting is handled haphazardly.  Need to decide the most appropriate
+behavior and implement it.  Right now one can do :let b:surround_indent = 1
+(or the global equivalent) to enable automatic re-indenting by Vim via |=|;
+should this be the default?
+
+ vim:tw=78:ts=8:ft=help:norl:
diff --git a/vim/doc/tags b/vim/doc/tags
new file mode 100644
index 0000000..54ecdda
--- /dev/null
+++ b/vim/doc/tags
@@ -0,0 +1,56 @@
+cs	surround.txt	/*cs*
+drawit	DrawIt.txt	/*drawit*
+drawit-DIdbl	DrawIt.txt	/*drawit-DIdbl*
+drawit-DInrml	DrawIt.txt	/*drawit-DInrml*
+drawit-DIsngl	DrawIt.txt	/*drawit-DIsngl*
+drawit-DIstart	DrawIt.txt	/*drawit-DIstart*
+drawit-DrawIt	DrawIt.txt	/*drawit-DrawIt*
+drawit-\di	DrawIt.txt	/*drawit-\\di*
+drawit-a	DrawIt.txt	/*drawit-a*
+drawit-b	DrawIt.txt	/*drawit-b*
+drawit-brush	DrawIt.txt	/*drawit-brush*
+drawit-c	DrawIt.txt	/*drawit-c*
+drawit-contents	DrawIt.txt	/*drawit-contents*
+drawit-dbl	DrawIt.txt	/*drawit-dbl*
+drawit-drawing	DrawIt.txt	/*drawit-drawing*
+drawit-e	DrawIt.txt	/*drawit-e*
+drawit-erase	DrawIt.txt	/*drawit-erase*
+drawit-example	DrawIt.txt	/*drawit-example*
+drawit-f	DrawIt.txt	/*drawit-f*
+drawit-history	DrawIt.txt	/*drawit-history*
+drawit-l	DrawIt.txt	/*drawit-l*
+drawit-manual	DrawIt.txt	/*drawit-manual*
+drawit-modes	DrawIt.txt	/*drawit-modes*
+drawit-move	DrawIt.txt	/*drawit-move*
+drawit-moving	DrawIt.txt	/*drawit-moving*
+drawit-options	DrawIt.txt	/*drawit-options*
+drawit-protect	DrawIt.txt	/*drawit-protect*
+drawit-s	DrawIt.txt	/*drawit-s*
+drawit-setbrush	DrawIt.txt	/*drawit-setbrush*
+drawit-setdrawit	DrawIt.txt	/*drawit-setdrawit*
+drawit-sngl	DrawIt.txt	/*drawit-sngl*
+drawit-start	DrawIt.txt	/*drawit-start*
+drawit-stop	DrawIt.txt	/*drawit-stop*
+drawit-tip	DrawIt.txt	/*drawit-tip*
+drawit-unicode	DrawIt.txt	/*drawit-unicode*
+drawit-usage	DrawIt.txt	/*drawit-usage*
+drawit-utf16	DrawIt.txt	/*drawit-utf16*
+drawit-utf8	DrawIt.txt	/*drawit-utf8*
+drawit-visblock	DrawIt.txt	/*drawit-visblock*
+ds	surround.txt	/*ds*
+g:drawit_insertmode	DrawIt.txt	/*g:drawit_insertmode*
+i_CTRL-G_S	surround.txt	/*i_CTRL-G_S*
+i_CTRL-G_s	surround.txt	/*i_CTRL-G_s*
+surround	surround.txt	/*surround*
+surround-customizing	surround.txt	/*surround-customizing*
+surround-issues	surround.txt	/*surround-issues*
+surround-mappings	surround.txt	/*surround-mappings*
+surround-replacements	surround.txt	/*surround-replacements*
+surround-targets	surround.txt	/*surround-targets*
+surround.txt	surround.txt	/*surround.txt*
+vS	surround.txt	/*vS*
+vgS	surround.txt	/*vgS*
+yS	surround.txt	/*yS*
+ySS	surround.txt	/*ySS*
+ys	surround.txt	/*ys*
+yss	surround.txt	/*yss*