update vim

7 files changed, 0 insertions, 754 deletions

diff --git a/vim/doc/DrawIt.txt b/vim/doc/DrawIt.txt
deleted file mode 100644
index 8e72f64..0000000
--- a/vim/doc/DrawIt.txt
+++ /dev/null
@@ -1,489 +0,0 @@
-DrawIt.txt*	The DrawIt Tool				Nov 25, 2013
-
-Authors:  Charles E. Campbell  <NdrchipO@ScampbellPfamily.AbizM>
-          Sylvain Viart             <molo@multimania.com>
-	  (remove NOSPAM from Campbell's email first)
-Copyright:    Copyright (C) 2004-2013 Charles E. Campbell
-	      Permission is hereby granted to use and distribute this code,
-	      with or without modifications, provided that this copyright
-	      notice is copied with it. Like anything else that's free,
-	      DrawIt.vim and DrawItPlugin.vim are provided *as is*; it comes
-	      with no warranty of any kind, either expressed or implied. By
-	      using this plugin, you agree that in no event will the copyright
-	      holder be liable for any damages resulting from the use of this
-	      software.
-
-
-==============================================================================
-1. Contents						*drawit-contents* {{{1
-
-	1. Contents......................: |drawit-contents|
-	2. DrawIt Manual.................: |drawit|
-	3. DrawIt Usage..................: |drawit-usage|
-	     Starting....................: |drawit-start|
-	     Stopping....................: |drawit-stop|
-	     User Map Protection.........: |drawit-protect|
-	     Drawing.....................: |drawit-drawing|
-	     Tip.........................: |drawit-tip|
-	     Changing Drawing Characters.: |drawit-setdrawit|
-	     Moving......................: |drawit-moving|
-	     Erasing.....................: |drawit-erase|
-	     Example.....................: |drawit-example|
-	     Visual Block Mode...........: |drawit-visblock|
-	     Brushes.....................: |drawit-brush|
-	     DrawIt Modes................: |drawit-modes|
-	4. DrawIt History................: |drawit-history|
-
-
-==============================================================================
-2. DrawIt Manual					*drawit* {{{1
-							*drawit-manual*
- /===============+============================================================\
- || Starting &   |                                                           ||
- || Stopping     | Explanation                                               ||
- ++--------------+-----------------------------------------------------------++
- ||  \di         | start DrawIt                     |drawit-start|             ||
- ||  \ds         | stop  DrawIt                     |drawit-stop|              ||
- ||  :DIstart    | start DrawIt                     |drawit-start|             ||
- ||  :DIstart S  | start DrawIt in single-bar mode  |drawit-start|             ||
- ||  :DIstart D  | start DrawIt in double-bar mode  |drawit-start|             ||
- ||  :DIsngl     | start DrawIt in single-bar mode  |drawit-start| |drawit-sngl| ||
- ||  :DIdbl      | start DrawIt in double-bar mode  |drawit-start| |drawit-dbl|  ||
- ||  :DIstop     | stop  DrawIt                     |drawit-stop|              ||
- ||  :DrawIt[!]  | start/stop DrawIt                |drawit-start| |drawit-stop| ||
- ||              |                                                           ||
- ++==============+===========================================================++
- ||   Maps       | Explanation                                               ||
- ++--------------+-----------------------------------------------------------++
- ||              | The DrawIt routines use a replace, move, and              ||
- ||              | replace/insert strategy.  The package also lets one insert||
- ||              | spaces, draw arrows by using the following characters or  ||
- ||              | keypad characters:                                        ||
- ||              +-----------------------------------------------------------++
- || <left>       | move and draw left                         |drawit-drawing| ||
- || <right>      | move and draw right, inserting lines/space as needed      ||
- || <up>         | move and draw up, inserting lines/space as needed         ||
- || <down>       | move and draw down, inserting lines/space as needed       ||
- || <s-left>     | move cursor left                              |drawit-move| ||
- || <s-right>    | move cursor right, inserting lines/space as needed        ||
- || <s-up>       | move cursor up, inserting lines/space as needed           ||
- || <s-down>     | move cursor down, inserting lines/space as needed         ||
- || <space>      | toggle into and out of erase mode                         ||
- || >            | insert a > and move right    (draw -> arrow)              ||
- || <            | insert a < and move left     (draw <- arrow)              ||
- || ^            | insert a ^ and move up       (draw ^  arrow)              ||
- || v            | insert a v and move down     (draw v  arrow)              ||
- || <pgdn>       | replace with a \, move down and right, and insert a \     ||
- || <end>        | replace with a /, move down and left,  and insert a /     ||
- || <pgup>       | replace with a /, move up   and right, and insert a /     ||
- || <home>       | replace with a \, move up   and left,  and insert a \     ||
- || \>           | insert a fat > and move right    (draw -> arrow)          ||
- || \<           | insert a fat < and move left     (draw <- arrow)          ||
- || \^           | insert a fat ^ and move up       (draw ^  arrow)          ||
- || \v           | insert a fat v and move down     (draw v  arrow)          ||
- ||<s-leftmouse> | drag and draw with current brush            |drawit-brush|  ||
- ||<c-leftmouse> | drag and move current brush                 |drawit-brush|  ||
- ||              |                                                           ||
- ||==============+===========================================================++
- ||Visual Cmds   | Explanation                                               ||
- ||--------------+-----------------------------------------------------------++
- ||              | The drawing mode routines use visual-block mode to        ||
- ||              | select endpoints for lines, arrows, and ellipses. Bresen- ||
- ||              | ham and Bresenham-like algorithms are used for this.      ||
- ||              |                                                           ||
- ||              | These routines need a block of spaces, and so the canvas  ||
- ||              | routine must first be used to create such a block.  The   ||
- ||              | canvas routine will query the user for the number of      ||
- ||              | lines to hold |'textwidth'| spaces.                         ||
- ||              +-----------------------------------------------------------++
- || \a           | draw arrow from corners of visual-block selected region   ||  |drawit-a|
- || \b           | draw box on visual-block selected region                  ||  |drawit-b|
- || \c           | the canvas routine (will query user, see above)           ||  |drawit-c|
- || \e           | draw an ellipse on visual-block selected region           ||  |drawit-e|
- || \f           | flood figure with a character (you will be prompted)      ||  |drawit-f|
- || \l           | draw line from corners of visual-block selected region    ||  |drawit-l|
- || \s           | spacer: appends spaces up to the textwidth (default: 78)  ||  |drawit-s|
- ||              |                                                           ||
- ++==============+===========================================================++
- || Function and Explanation                                                 ||
- ++--------------+-----------------------------------------------------------++
- ||  :call SetDrawIt('vertical','horizontal','crossing','\','/','X','*')     ||
- ||            set drawing characters for motions for moving                 ||
- ||            and for the ellipse drawing boundary        |drawit-setdrawit|  ||
- ||  default   motion                                                        ||
- ||  |         up/down,                                                      ||
- ||  -         left/right,                                                   ||
- ||  +         -| crossing,                                                  ||
- ||  \         downright,                                                    ||
- ||  /         downleft, and                                                 ||
- ||  X         \/ crossing                                                   ||
- ++=======================+==================================================++
- ||  Commands             | Explanation                                      ||
- ++-----------------------+--------------------------------------------------++
- ||  :SetBrush a-z        | sets brush (register) to given register          ||
- ||  :'<,'>SetBrush a-z   | yanks visual block to brush      |drawit-brush|||    ||
- ||  :DInrml              | switch to normal mode            |drawit-nrml|     ||
- ||  :DIsngl              | switch to single-line mode       |drawit-sngl|     ||
- ||  :DIdbl               | switch to double-line mode       |drawit-dbl|      ||
- \============================================================================/
-
-
-==============================================================================
-3. DrawIt Usage						*drawit-usage* {{{1
-
-STARTING						*drawit-start* {{{2
-\di           (starts in normal     drawing mode)       *drawit-\di*
-:DrawIt       (starts in normal     drawing mode)       *drawit-DrawIt*
-:DIstart      (starts in normal     drawing mode)       *drawit-DIstart*
-:DIstart S    (starts in single-bar drawing mode)
-:DIstart D    (starts in double-bar drawing mode)
-:DInrml       (starts in normal     drawing mode)       *drawit-DInrml*
-:DIsngl       (starts in single-bar drawing mode)       *drawit-DIsngl*
-:DIdbl        (starts in double-bar drawing mode)       *drawit-DIdbl*
-
-Typically one puts <drawit.vim> into the .vim/plugin directory
-(vimfiles\plugin for Windows) where it becomes always available.  It uses a
-minimal interface (\di: you can think of it as *D*raw*I*t or *D*rawIt
-*I*nitialize) to start it and (\ds: *D*rawIt *S*top) to stop it.  Instead of
-using "\" you may specify your own preference for a map leader (see
-|mapleader|).
-
-With a trailing 'S', :DIstart will begin in single-bar mode (see |drawit-sngl|).
-With a trailing 'D', :DIstart will begin in double-bar mode (see |drawit-dbl|).
-Similarly, :DIsngl and :DIdbl will start DrawIt as well as begin in
-single-bar or double-bar mode, respectively.
-
-A message, "[DrawIt]", will appear on the message line.
-
-
-STOPPING						*drawit-stop* {{{2
-\ds
-:DIstop
-:DrawIt!
-
-When you are done with DrawIt, use \ds to stop DrawIt mode.  Stopping DrawIt
-will restore your usual options and remove the maps DrawIt set up.
-
-A message, "[DrawIt off]", will appear on the message line.
-
-						*drawit-utf16*
-						*drawit-utf8* *drawit-unicode*
-NORMAL, SINGLE BAR, AND DOUBLE BAR MODES	*drawit-sngl* *drawit-dbl*
-:DInrml  :DIsngl  :DIdbl
-
-One may use these commands to start up Drawit in normal, single-bar, or
-double-bar modes, respectively.  When your |'encoding'| is utf-8 or utf-16,
-DrawIt supports drawing with special box characters (single-bar, double_bar).
-These commands are also used to switch to normal, single-bar, or double-bar
-modes.
-
-
-USER MAP PROTECTION					*drawit-protect* {{{2
-
-Starting DrawIt causes it to set up a number of maps which facilitate drawing.
-DrawIt accommodates users with conflicting maps by saving both maps and user
-options and before setting them to what DrawIt needs.  When you stop DrawIt
-(|drawit-stop|), DrawIt will restore the user's maps and options as they were
-before DrawIt was started.
-
-
-OPTIONS                                               	*drawit-options* {{{2
-
-							*g:drawit_insertmode*
-g:drawit_insertmode : if this variable exists and is 1 then maps are
-	              made which make cursor-control drawing available
-		      while in insert mode, too.  Otherwise, DrawIt's
-		      maps only affect normal mode.
-
-DRAWING							*drawit-drawing* {{{2
-
-After DrawIt is started, use the number pad or arrow keys to move the cursor
-about.  As the cursor moves, DrawIt will then leave appropriate "line"
-characters behind as you move horizontally, vertically, or diagonally, and
-will transparently enlarge your file to accommodate your drawing as needed.
-The trail will consist of -, |, \, / characters (depending on which direction
-and SetDrawIt() changes), and + and X characters where line crossings occur.
-You may use h-j-k-l to move about your display and generally use editing
-commands as you wish even while in DrawIt mode.
-
-Another tool that may be used to convert Ascii-art into nice pictures is
-available at https://github.com/christiangoltz/shaape .
-
-
-CHANGING DRAWING CHARACTERS				*drawit-setdrawit* {{{2
-
-The SetDrawIt() function is available for those who wish to change the
-characters that DrawIt uses. >
-
-    ex. :call SetDrawIt('*','*','*','*','*','*','*')
-    ex. :call SetDrawIt('-','|','-','\','/','/','*')
-<
-The first example shows how to change all the DrawIt drawing characters to
-asterisks, and the second shows how to give crossing priority to - and /.
-The default setting is equivalent to: >
-
-	:call SetDrawIt('|','-','+','\','/','X','*')
-<
-where SetDrawit()'s arguments refer, in order, to the >
-
-	vertical			drawing character
-    	horizontal			drawing character
-    	horizontal/vertical crossing	drawing character
-    	down right			drawing character
-    	down left			drawing character
-    	diagonal crossing		drawing character
-	ellipse boundary                drawing character
-<
-
-TIP							*drawit-tip*
-
-I have found that sometimes one or more of the <home>, <end>, <pageup>,
-and <pagedown> keys give unique sequences but are not interpreted
-properly by Vim.  This problem impacts DrawIt as it uses those four
-keys to signify diagonal moves/drawing.  One solution I use is to
-put into my <.vimrc> file mapings like:
-
-	map ^V... <home>
-
-where the ellipsis (...) is the actual character sequence produced by
-hitting the key.  The way to generate such maps is to type "map ",
-followed by three control-v presses, press the associated key, then
-a space followed by the proper interpretation sequence (ie. <home>).
-
-
-MOVING					*drawit-move* *drawit-moving* {{{2
-
-DrawIt supports shifting the arrow keys to cause motion of the cursor.  The
-motion of the cursor will not modify what's below the cursor.  The cursor
-will move and lines and/or spaces will be inserted to support the move as
-required.  Your terminal may not support shifted arrow keys, however, or Vim
-may not catch them as such.  For example, on the machine I use, shift-up
-(<s-up>) produced <Esc>[161q, but vim didn't know that sequence was a <s-up>.
-I merely made a nmap:
-
-	nmap <Esc>[161q	<s-up>
-
-and vim thereafter recognized the <s-up> command.
-
-
-ERASING							*drawit-erase* {{{2
-<space>
-
-The <space> key will toggle DrawIt's erase mode/DrawIt mode.  When in [DrawIt
-erase] mode, a message "[DrawIt erase]" will appear and the number pad will
-now cause spaces to be drawn instead of the usual drawing characters.  The
-drawing behavior will be restored when the <space> key toggles DrawIt back
-to regular DrawIt mode.
-
-
-EXAMPLES						*drawit-example* {{{2
-
-Needless to say, the square spirals which follow were done with DrawIt and
-a bit of block editing with Vim: >
-
-   +------------ -----------+ +------------ -----------+ +------------
-   |+----------+ +---------+| |+----------+ +---------+| |+----------+
-   ||+--------+| |+-------+|| ||+--------+| |+-------+|| ||+--------+|
-   |||-------+|| ||+------||| |||-------+|| ||+------||| |||-------+||
-   ||+-------+|| ||+------+|| ||+-------+|| ||+------+|| ||+-------+||
-   |+---------+| |+--------+| |+---------+| |+--------+| |+---------+|
-   +-----------+ +----------+ +-----------+ +----------+ +-----------+
-
-VISUAL BLOCK MODE FOR ARROWS LINES BOXES AND ELLIPSES	*drawit-visblock* {{{2
-
-\a : draw arrow from corners of visual-block selected region	*drawit-a*
-\b : draw box on visual-block selected region			*drawit-b*
-\c : the canvas routine (will query user, see above)		*drawit-c*
-\e : draw an ellipse on visual-block selected region		*drawit-e*
-\f : flood figure with a character (you will be prompted)	*drawit-f*
-\l : draw line from corners of visual-block selected region	*drawit-l*
-\s : spacer: appends spaces up to the textwidth (default: 78)	*drawit-s*
-
-The DrawIt package has been merged with Sylvain Viart's drawing package (by
-permission) which provides DrawIt with visual-block selection of
-starting/ending point drawing of arrows (\a), lines (\l), and boxes (\b).
-Additionally I wrote an ellipse drawing function using visual block
-specification (|drawit-e|).
-
-One may create a block of spaces for these maps to operate in; the "canvas"
-routine (\c) will help create such blocks.  First, the s:Canvas() routine will
-query the user for the number of lines s/he wishes to have, and will then fill
-those lines with spaces out to the |'textwidth'| if user has specified it;
-otherwise, the display width will be used.
-
-Although most of the maps use visual-block selection, that isn't true of the
-\f map.  Instead, it assume that you have already drawn some closed figure
-and want to fill it with some character.
-
-The Sylvain Viart functions and the ellipse drawing function depend
-upon using visual block mode.  As a typical use: >
-
-	Example: * \h
-                   DrawIt asks: how many lines under the cursor? 10
-                   DrawIt then appends 10 lines filled with blanks
-                   out to textwidth (if defined) or 78 columns.
-                 * ctrl-v (move) \b
-                   DrawIt then draws a box
-		 * ctrl-v (move) \e
-                   DrawIt then draws an ellipse
-<
-Select the first endpoint with ctrl-v and then move to the other endpoint.
-One may then select \a for arrows, \b for boxes, \e for ellipses, or \l for
-lines.  The internal s:AutoCanvas() will convert tabs to spaces and will
-extend with spaces as needed to support the visual block.  Note that when
-DrawIt is enabled, virtualedit is also enabled (to "all").
->
-        Examples:
-
-        __                _         ***************           +-------+
-          \_            _/      ****               ****       |       |
-            \_        _/      **      --------->       **     |       |
-              \_    _/          ****               ****       |       |
-                \__/   <-------     ***************           +-------+
-
-		\l        \a           \e and \a                  \b
-<
-							*drawit-setbrush*
-BRUSHES							*drawit-brush* {{{2
->
- :SetBrush [a-z]
-<
-	Set the current brush to the selected brush register:
->
-		ex.  :SetBrush b
-
- :'<,'>SetBrush [a-z]
-<
-	Select text for the brush by using visual-block mode: ctrl-v, move .
-	Then set the current text into the brush register:  (default brush: a)
->
- <leftmouse>
-<
-	Select a visual-block region.  One may use "ay, for example,
-	to yank selected text to register a.
->
- <shift-leftmouse>
-<
-	One may drag and draw with the current brush (default brush: a)
-	by holding down the shift key and the leftmouse button and moving
-	the mouse.  Blanks in the brush are considered to be transparent.
->
- <ctrl-leftmouse>
-<
-	One may drag and move a selection with <ctrl-leftmouse>.  First,
-	select the region using the <leftmouse>.  Release the mouse button,
-	then press ctrl and the <leftmouse> button; while continuing to press
-	the button, move the mouse.  The selected block of text will then
-	move along with the cursor.
->
- \ra ... \rz
-<
-	Replace text with the given register's contents (ie. the brush).
->
- \pa ... \pz
-<
-	Like \ra ... \rz, except that blanks are considered to be transparent.
-
-	Example: Draw the following >
-			\ \
-			o o
-			 *
-			---
-<		Then use ctrl-v, move, "ay to grab a copy into register a.
-		By default, the current brush uses register a (change brush
-		with :SetBrush [reg]).  Hold the <shift> and <leftbutton>
-		keys down and move the mouse; as you move, a copy of the
-		brush will be left behind.
-
-
-DRAWIT MODES						*drawit-modes* {{{2
-
-  -[DrawIt]       regular DrawIt mode                     (|drawit-start|)
-  -[DrawIt off]   DrawIt is off                           (|drawit-stop| )
-  -[DrawIt erase] DrawIt will erase using the number pad  (|drawit-erase|)
-
-  g:DrChipTopLvlMenu: by default its "DrChip"; you may set this to whatever
-                  you like in your <.vimrc>.  This variable controls where
-		  DrawIt's menu items are placed.
-
-
-==============================================================================
-4. History						*drawit-history* {{{1
-
-	13	Sep 05, 2013	* improved s:Strlen() -- now uses |strdisplaywidth()|
-				  if available.
-		Sep 13, 2013	* (Paul Wagland) found a case where lines were
-				  being drawn with the wrong character.  This
-				  affected the Bresenham-algorithm based
-				  drawing facility (ie. lines and arrows
-				  specified by visual blocks;
-				  |drawit-a|, |drawit-l|).
-	12	Nov 16, 2012	* (Alexandre Viau) arrows weren't being drawn.
-				  Fixed.
-		Nov 29, 2012	* (Kim Jang-hwan) reported that with
-				  g:Align_xstrlen set to 3 that the cursor was
-				  moved (linewise) after invocation.  This
-				  problem also afflicted DrawIt.  Fixed.
-	11	Jan 21, 2010	* (Evan Stern) several places were using
-				  hardcoded drawing characters instead of
-				  b:di_... equivalents.
-		Feb 22, 2011	* for menus, &go =~# used to insure correct case
-		Sep 22, 2011	* ctrl-leftmouse (see |drawit-brush|) now moves the
-				  selected text entirely, no longer leaving a copy
-				  of the text where it was initially.
-		Nov 07, 2011	* included support for utf-8 box drawing characters
-		Nov 16, 2011	* included support for utf-8 single-double characters
-		Nov 16, 2011	* included support for cp437 box drawing characters
-		Dec 06, 2011	* included support for box and line drawing (\b, \l)
-				  support for utf-8 / cp437 box drawing characters
-		Dec 06, 2011	* fat arrows now use utf-8 characters when available
-		Jan 30, 2012	* \f supported when using utf-8/cp437 box drawing
-				  characters as boundary characters
-	10	Jun 12, 2008	* Fixed a bug with ctrl-leftmouse (which was leaving
-				  a space in the original selected text)
-		Mar 24, 2009	* :DrawIt starts, :DrawIt! stops DrawIt mode.
-		Mar 24, 2009	* I've included <script> modifiers to the maps to
-				  cause rhs remapping only with mappings local to
-				  the script (see |:map-script|)
-	9	Sep 14, 2007	* Johann-Guenter Simon fixed a bug with s:DrawErase();
-				  it called SetDrawIt() and that call hadn't been
-				  updated to account for the new b:di_ellipse
-				  parameter.
-	8	Feb 12, 2007	* fixed a bug which prevented multi-character user
-				  maps from being restored properly
-		May 03, 2007	* Extended SetDrawIt() to handle b:di_ellipse, the
-				  ellipse boundary drawing character
-				* Changed "Holer" to "Canvas", and wrote AutoCanvas(),
-				  which allows one to use the visual-block drawing
-				  maps without creating a canvas first.
-				* DrawIt implements using the ctrl-leftmouse to move
-				  a visual-block selected region.
-				* Floods can now be done inside an ellipse
-				* DrawIt's maps are now all users of <buffer>
-	 7	Feb 16, 2005	* now checks that "m" is in &go before attempting to
-				  use menus
-		Aug 17, 2005	* report option workaround
-		Nov 01, 2005	* converted DrawIt to use autoload feature of vim 7.0
-		Dec 28, 2005	* now uses cecutil to save/restore user maps
-		Jan 18, 2006	* cecutil now updated to use keepjumps
-		Jan 23, 2006	* :DIstart and :DIstop commands provided; thus users
-				  using  "set noremap" can still use DrawIt.
-		Jan 26, 2006	* DrawIt menu entry now keeps its place
-		Apr 10, 2006	* Brushes were implemented
-	 6	Feb 24, 2003	* The latest DrawIt now provides a fill function.
-				  \f will ask for a character to fill the figure
-				  surrounding the current cursor location.  Plus
-				  I suggest reading :he drawit-tip for those whose
-				  home/pageup/pagedown/end keys aren't all working
-				  properly with DrawIt.
-		08/18/03	* \p[a-z] and \r[a-z] implemented
-		08/04/03	* b:..keep variables renamed to b:di_..keep variables
-				  StopDrawIt() now insures that erase mode is off
-		03/11/03	* included g:drawit_insertmode handling
-		02/21/03	* included flood function
-		12/11/02	* deletes trailing whitespace only if holer used
-		8/27/02		* fat arrowheads included
-				* shift-arrow keys move but don't modify
-
- ---------------------------------------------------------------------
-vim:tw=78:ts=8:ft=help:fdm=marker
diff --git a/vim/doc/imaps.txt.gz b/vim/doc/imaps.txt.gz
deleted file mode 120000
index cf5808b..0000000
--- a/vim/doc/imaps.txt.gz
+++ /dev/null
@@ -1 +0,0 @@
-/usr/share/vim/addons/doc/imaps.txt.gz
\ No newline at end of file
diff --git a/vim/doc/latex-suite-quickstart.txt.gz b/vim/doc/latex-suite-quickstart.txt.gz
deleted file mode 120000
index 5ef4db2..0000000
--- a/vim/doc/latex-suite-quickstart.txt.gz
+++ /dev/null
@@ -1 +0,0 @@
-/usr/share/vim/addons/doc/latex-suite-quickstart.txt.gz
\ No newline at end of file
diff --git a/vim/doc/latex-suite.txt.gz b/vim/doc/latex-suite.txt.gz
deleted file mode 120000
index 35c3d5a..0000000
--- a/vim/doc/latex-suite.txt.gz
+++ /dev/null
@@ -1 +0,0 @@
-/usr/share/vim/addons/doc/latex-suite.txt.gz
\ No newline at end of file
diff --git a/vim/doc/latexhelp.txt.gz b/vim/doc/latexhelp.txt.gz
deleted file mode 120000
index f8197a0..0000000
--- a/vim/doc/latexhelp.txt.gz
+++ /dev/null
@@ -1 +0,0 @@
-/usr/share/vim/addons/doc/latexhelp.txt.gz
\ No newline at end of file
diff --git a/vim/doc/surround.txt b/vim/doc/surround.txt
deleted file mode 100644
index 30a642a..0000000
--- a/vim/doc/surround.txt
+++ /dev/null
@@ -1,205 +0,0 @@
-*surround.txt*  Plugin for deleting, changing, and adding "surroundings"
-
-Author:  Tim Pope <http://tpo.pe/>
-License: Same terms as Vim itself (see |license|)
-
-This plugin is only available if 'compatible' is not set.
-
-INTRODUCTION                                    *surround*
-
-This plugin is a tool for dealing with pairs of "surroundings."  Examples
-of surroundings include parentheses, quotes, and HTML tags.  They are
-closely related to what Vim refers to as |text-objects|.  Provided
-are mappings to allow for removing, changing, and adding surroundings.
-
-Details follow on the exact semantics, but first, consider the following
-examples.  An asterisk (*) is used to denote the cursor position.
-
-  Old text                  Command     New text ~
-  "Hello *world!"           ds"         Hello world!
-  [123+4*56]/2              cs])        (123+456)/2
-  "Look ma, I'm *HTML!"     cs"<q>      <q>Look ma, I'm HTML!</q>
-  if *x>3 {                 ysW(        if ( x>3 ) {
-  my $str = *whee!;         vllllS'     my $str = 'whee!';
-
-While a few features of this plugin will work in older versions of Vim,
-Vim 7 is recommended for full functionality.
-
-MAPPINGS                                        *surround-mappings*
-
-Delete surroundings is *ds* .  The next character given determines the target
-to delete.  The exact nature of the target is explained in |surround-targets|
-but essentially it is the last character of a |text-object|.  This mapping
-deletes the difference between the "i"nner object and "a"n object.  This is
-easiest to understand with some examples:
-
-  Old text                  Command     New text ~
-  "Hello *world!"           ds"         Hello world!
-  (123+4*56)/2              ds)         123+456/2
-  <div>Yo!*</div>           dst         Yo!
-
-Change surroundings is *cs* .  It takes two arguments, a target like with
-|ds|, and a replacement.  Details about the second argument can be found
-below in |surround-replacements|.  Once again, examples are in order.
-
-  Old text                  Command     New text ~
-  "Hello *world!"           cs"'        'Hello world!'
-  "Hello *world!"           cs"<q>      <q>Hello world!</q>
-  (123+4*56)/2              cs)]        [123+456]/2
-  (123+4*56)/2              cs)[        [ 123+456 ]/2
-  <div>Yo!*</div>           cst<p>      <p>Yo!</p>
-
-*ys* takes a valid Vim motion or text object as the first object, and wraps
-it using the second argument as with |cs|.  (It's a stretch, but a good
-mnemonic for "ys" is "you surround".)
-
-  Old text                  Command     New text ~
-  Hello w*orld!             ysiw)       Hello (world)!
-
-As a special case, *yss* operates on the current line, ignoring leading
-whitespace.
-
-  Old text                  Command     New text ~
-      Hello w*orld!         yssB            {Hello world!}
-
-There is also *yS* and *ySS* which indent the surrounded text and place it
-on a line of its own.
-
-In visual mode, a simple "S" with an argument wraps the selection.  This is
-referred to as the *vS* mapping, although ordinarily there will be
-additional keystrokes between the v and S.  In linewise visual mode, the
-surroundings are placed on separate lines and indented.  In blockwise visual
-mode, each line is surrounded.
-
-A "gS" in visual mode, known as *vgS* , behaves similarly.  In linewise visual
-mode, the automatic indenting is suppressed.  In blockwise visual mode, this
-enables surrounding past the end of the line with 'virtualedit' set (there
-seems to be no way in Vim Script to differentiate between a jagged end of line
-selection and a virtual block selected past the end of the line, so two maps
-were needed).
-
-                                                *i_CTRL-G_s* *i_CTRL-G_S*
-Finally, there is an experimental insert mode mapping on <C-G>s and <C-S>.
-Beware that the latter won't work on terminals with flow control (if you
-accidentally freeze your terminal, use <C-Q> to unfreeze it).  The mapping
-inserts the specified surroundings and puts the cursor between them.  If,
-immediately after the mapping and before the replacement, a second <C-S> or
-carriage return is pressed, the prefix, cursor, and suffix will be placed on
-three separate lines.  <C-G>S (not <C-G>s) also exhibits this behavior.
-
-TARGETS                                         *surround-targets*
-
-The |ds| and |cs| commands both take a target as their first argument.  The
-possible targets are based closely on the |text-objects| provided by Vim.
-All targets are currently just one character.
-
-Eight punctuation marks, (, ), {, }, [, ], <, and >, represent themselves
-and their counterparts.  If the opening mark is used, contained whitespace is
-also trimmed.  The targets b, B, r, and a are aliases for ), }, ], and > 
-(the first two mirror Vim; the second two are completely arbitrary and
-subject to change).
-
-Three quote marks, ', ", `, represent themselves, in pairs.  They are only
-searched for on the current line.
-
-A t is a pair of HTML or XML tags.  See |tag-blocks| for details.  Remember
-that you can specify a numerical argument if you want to get to a tag other
-than the innermost one.
-
-The letters w, W, and s correspond to a |word|, a |WORD|, and a |sentence|,
-respectively.  These are special in that they have nothing to delete, and
-used with |ds| they are a no-op.  With |cs|, one could consider them a
-slight shortcut for ysi (cswb == ysiwb, more or less).
-
-A p represents a |paragraph|.  This behaves similarly to w, W, and s above;
-however, newlines are sometimes added and/or removed.
-
-REPLACEMENTS                                    *surround-replacements*
-
-A replacement argument is a single character, and is required by |cs|, |ys|,
-and |vS|.  Undefined replacement characters (with the exception of alphabetic
-characters) default to placing themselves at the beginning and end of the
-destination, which can be useful for characters like / and |.
-
-If either ), }, ], or > is used, the text is wrapped in the appropriate pair
-of characters.  Similar behavior can be found with (, {, and [ (but not <),
-which append an additional space to the inside.  Like with the targets above,
-b, B, r, and a are aliases for ), }, ], and >.  To fulfill the common need for
-code blocks in C-style languages, <C-}> (which is really <C-]>) adds braces on
-lines separate from the content.
-
-If t or < is used, Vim prompts for an HTML/XML tag to insert.  You may specify
-attributes here and they will be stripped from the closing tag.  End your
-input by pressing <CR> or >.  If <C-T> is used, the tags will appear on lines
-by themselves.
-
-If s is used, a leading but not trailing space is added.  This is useful for
-removing parentheses from a function call with csbs.
-
-CUSTOMIZING                                     *surround-customizing*
-
-The following adds a potential replacement on "-" (ASCII 45) in PHP files.
-(To determine the ASCII code to use, :echo char2nr("-")).  The carriage
-return will be replaced by the original text.
->
-  autocmd FileType php let b:surround_45 = "<?php \r ?>"
-<
-This can be used in a PHP file as in the following example.
-
-  Old text                  Command     New text ~
-  print "Hello *world!"     yss-        <?php print "Hello world!" ?>
-
-Additionally, one can use a global variable for globally available
-replacements.
->
-  let g:surround_45 = "<% \r %>"
-  let g:surround_61 = "<%= \r %>"
-<
-Advanced, experimental, and subject to change:  One can also prompt for
-replacement text.  The syntax for this is to surround the replacement in pairs
-of low numbered control characters.  If this sounds confusing, that's because
-it is (but it makes the parsing easy).  Consider the following example for a
-LaTeX environment on the "l" replacement.
->
-  let g:surround_108 = "\\begin{\1environment: \1}\r\\end{\1\1}"
-<
-When this replacement is used,  the user is prompted with an "environment: "
-prompt for input.  This input is inserted between each set of \1's.
-Additional inputs up to \7 can be used.
-
-Furthermore, one can specify a regular expression substitution to apply.
->
-  let g:surround_108 = "\\begin{\1environment: \1}\r\\end{\1\r}.*\r\1}"
-<
-This will remove anything after the first } in the input when the text is
-placed within the \end{} slot.  The first \r marks where the pattern begins,
-and the second where the replacement text begins.
-
-Here's a second example for creating an HTML <div>.  The substitution cleverly
-prompts for an id, but only adds id="" if it is non-blank.  You may have to
-read this one a few times slowly before you understand it.
->
-  let g:surround_{char2nr("d")} = "<div\1id: \r..*\r id=\"&\"\1>\r</div>"
-<
-Inputting text replacements is a proof of concept at this point. The ugly,
-unintuitive interface and the brevity of the documentation reflect this.
-
-Finally, It is possible to always append a string to surroundings in insert
-mode (and only insert mode).  This is useful with certain plugins and mappings
-that allow you to jump to such markings.
->
-  let g:surround_insert_tail = "<++>"
-<
-ISSUES                                          *surround-issues*
-
-Vim could potentially get confused when deleting/changing occurs at the very
-end of the line.  Please report any repeatable instances of this.
-
-Do we need to use |inputsave()|/|inputrestore()| with the tag replacement?
-
-Indenting is handled haphazardly.  Need to decide the most appropriate
-behavior and implement it.  Right now one can do :let b:surround_indent = 1
-(or the global equivalent) to enable automatic re-indenting by Vim via |=|;
-should this be the default?
-
- vim:tw=78:ts=8:ft=help:norl:
diff --git a/vim/doc/tags b/vim/doc/tags
deleted file mode 100644
index 54ecdda..0000000
--- a/vim/doc/tags
+++ /dev/null
@@ -1,56 +0,0 @@
-cs	surround.txt	/*cs*
-drawit	DrawIt.txt	/*drawit*
-drawit-DIdbl	DrawIt.txt	/*drawit-DIdbl*
-drawit-DInrml	DrawIt.txt	/*drawit-DInrml*
-drawit-DIsngl	DrawIt.txt	/*drawit-DIsngl*
-drawit-DIstart	DrawIt.txt	/*drawit-DIstart*
-drawit-DrawIt	DrawIt.txt	/*drawit-DrawIt*
-drawit-\di	DrawIt.txt	/*drawit-\\di*
-drawit-a	DrawIt.txt	/*drawit-a*
-drawit-b	DrawIt.txt	/*drawit-b*
-drawit-brush	DrawIt.txt	/*drawit-brush*
-drawit-c	DrawIt.txt	/*drawit-c*
-drawit-contents	DrawIt.txt	/*drawit-contents*
-drawit-dbl	DrawIt.txt	/*drawit-dbl*
-drawit-drawing	DrawIt.txt	/*drawit-drawing*
-drawit-e	DrawIt.txt	/*drawit-e*
-drawit-erase	DrawIt.txt	/*drawit-erase*
-drawit-example	DrawIt.txt	/*drawit-example*
-drawit-f	DrawIt.txt	/*drawit-f*
-drawit-history	DrawIt.txt	/*drawit-history*
-drawit-l	DrawIt.txt	/*drawit-l*
-drawit-manual	DrawIt.txt	/*drawit-manual*
-drawit-modes	DrawIt.txt	/*drawit-modes*
-drawit-move	DrawIt.txt	/*drawit-move*
-drawit-moving	DrawIt.txt	/*drawit-moving*
-drawit-options	DrawIt.txt	/*drawit-options*
-drawit-protect	DrawIt.txt	/*drawit-protect*
-drawit-s	DrawIt.txt	/*drawit-s*
-drawit-setbrush	DrawIt.txt	/*drawit-setbrush*
-drawit-setdrawit	DrawIt.txt	/*drawit-setdrawit*
-drawit-sngl	DrawIt.txt	/*drawit-sngl*
-drawit-start	DrawIt.txt	/*drawit-start*
-drawit-stop	DrawIt.txt	/*drawit-stop*
-drawit-tip	DrawIt.txt	/*drawit-tip*
-drawit-unicode	DrawIt.txt	/*drawit-unicode*
-drawit-usage	DrawIt.txt	/*drawit-usage*
-drawit-utf16	DrawIt.txt	/*drawit-utf16*
-drawit-utf8	DrawIt.txt	/*drawit-utf8*
-drawit-visblock	DrawIt.txt	/*drawit-visblock*
-ds	surround.txt	/*ds*
-g:drawit_insertmode	DrawIt.txt	/*g:drawit_insertmode*
-i_CTRL-G_S	surround.txt	/*i_CTRL-G_S*
-i_CTRL-G_s	surround.txt	/*i_CTRL-G_s*
-surround	surround.txt	/*surround*
-surround-customizing	surround.txt	/*surround-customizing*
-surround-issues	surround.txt	/*surround-issues*
-surround-mappings	surround.txt	/*surround-mappings*
-surround-replacements	surround.txt	/*surround-replacements*
-surround-targets	surround.txt	/*surround-targets*
-surround.txt	surround.txt	/*surround.txt*
-vS	surround.txt	/*vS*
-vgS	surround.txt	/*vgS*
-yS	surround.txt	/*yS*
-ySS	surround.txt	/*ySS*
-ys	surround.txt	/*ys*
-yss	surround.txt	/*yss*