diff options
Diffstat (limited to 'vim/doc')
| -rw-r--r-- | vim/doc/DrawIt.txt | 489 | ||||
| l--------- | vim/doc/imaps.txt.gz | 1 | ||||
| l--------- | vim/doc/latex-suite-quickstart.txt.gz | 1 | ||||
| l--------- | vim/doc/latex-suite.txt.gz | 1 | ||||
| l--------- | vim/doc/latexhelp.txt.gz | 1 | ||||
| -rw-r--r-- | vim/doc/surround.txt | 205 | ||||
| -rw-r--r-- | vim/doc/tags | 56 |
7 files changed, 0 insertions, 754 deletions
diff --git a/vim/doc/DrawIt.txt b/vim/doc/DrawIt.txt deleted file mode 100644 index 8e72f64..0000000 --- a/vim/doc/DrawIt.txt +++ /dev/null @@ -1,489 +0,0 @@ -DrawIt.txt* The DrawIt Tool Nov 25, 2013 - -Authors: Charles E. Campbell <NdrchipO@ScampbellPfamily.AbizM> - Sylvain Viart <molo@multimania.com> - (remove NOSPAM from Campbell's email first) -Copyright: Copyright (C) 2004-2013 Charles E. Campbell - Permission is hereby granted to use and distribute this code, - with or without modifications, provided that this copyright - notice is copied with it. Like anything else that's free, - DrawIt.vim and DrawItPlugin.vim are provided *as is*; it comes - with no warranty of any kind, either expressed or implied. By - using this plugin, you agree that in no event will the copyright - holder be liable for any damages resulting from the use of this - software. - - -============================================================================== -1. Contents *drawit-contents* {{{1 - - 1. Contents......................: |drawit-contents| - 2. DrawIt Manual.................: |drawit| - 3. DrawIt Usage..................: |drawit-usage| - Starting....................: |drawit-start| - Stopping....................: |drawit-stop| - User Map Protection.........: |drawit-protect| - Drawing.....................: |drawit-drawing| - Tip.........................: |drawit-tip| - Changing Drawing Characters.: |drawit-setdrawit| - Moving......................: |drawit-moving| - Erasing.....................: |drawit-erase| - Example.....................: |drawit-example| - Visual Block Mode...........: |drawit-visblock| - Brushes.....................: |drawit-brush| - DrawIt Modes................: |drawit-modes| - 4. DrawIt History................: |drawit-history| - - -============================================================================== -2. DrawIt Manual *drawit* {{{1 - *drawit-manual* - /===============+============================================================\ - || Starting & | || - || Stopping | Explanation || - ++--------------+-----------------------------------------------------------++ - || \di | start DrawIt |drawit-start| || - || \ds | stop DrawIt |drawit-stop| || - || :DIstart | start DrawIt |drawit-start| || - || :DIstart S | start DrawIt in single-bar mode |drawit-start| || - || :DIstart D | start DrawIt in double-bar mode |drawit-start| || - || :DIsngl | start DrawIt in single-bar mode |drawit-start| |drawit-sngl| || - || :DIdbl | start DrawIt in double-bar mode |drawit-start| |drawit-dbl| || - || :DIstop | stop DrawIt |drawit-stop| || - || :DrawIt[!] | start/stop DrawIt |drawit-start| |drawit-stop| || - || | || - ++==============+===========================================================++ - || Maps | Explanation || - ++--------------+-----------------------------------------------------------++ - || | The DrawIt routines use a replace, move, and || - || | replace/insert strategy. The package also lets one insert|| - || | spaces, draw arrows by using the following characters or || - || | keypad characters: || - || +-----------------------------------------------------------++ - || <left> | move and draw left |drawit-drawing| || - || <right> | move and draw right, inserting lines/space as needed || - || <up> | move and draw up, inserting lines/space as needed || - || <down> | move and draw down, inserting lines/space as needed || - || <s-left> | move cursor left |drawit-move| || - || <s-right> | move cursor right, inserting lines/space as needed || - || <s-up> | move cursor up, inserting lines/space as needed || - || <s-down> | move cursor down, inserting lines/space as needed || - || <space> | toggle into and out of erase mode || - || > | insert a > and move right (draw -> arrow) || - || < | insert a < and move left (draw <- arrow) || - || ^ | insert a ^ and move up (draw ^ arrow) || - || v | insert a v and move down (draw v arrow) || - || <pgdn> | replace with a \, move down and right, and insert a \ || - || <end> | replace with a /, move down and left, and insert a / || - || <pgup> | replace with a /, move up and right, and insert a / || - || <home> | replace with a \, move up and left, and insert a \ || - || \> | insert a fat > and move right (draw -> arrow) || - || \< | insert a fat < and move left (draw <- arrow) || - || \^ | insert a fat ^ and move up (draw ^ arrow) || - || \v | insert a fat v and move down (draw v arrow) || - ||<s-leftmouse> | drag and draw with current brush |drawit-brush| || - ||<c-leftmouse> | drag and move current brush |drawit-brush| || - || | || - ||==============+===========================================================++ - ||Visual Cmds | Explanation || - ||--------------+-----------------------------------------------------------++ - || | The drawing mode routines use visual-block mode to || - || | select endpoints for lines, arrows, and ellipses. Bresen- || - || | ham and Bresenham-like algorithms are used for this. || - || | || - || | These routines need a block of spaces, and so the canvas || - || | routine must first be used to create such a block. The || - || | canvas routine will query the user for the number of || - || | lines to hold |'textwidth'| spaces. || - || +-----------------------------------------------------------++ - || \a | draw arrow from corners of visual-block selected region || |drawit-a| - || \b | draw box on visual-block selected region || |drawit-b| - || \c | the canvas routine (will query user, see above) || |drawit-c| - || \e | draw an ellipse on visual-block selected region || |drawit-e| - || \f | flood figure with a character (you will be prompted) || |drawit-f| - || \l | draw line from corners of visual-block selected region || |drawit-l| - || \s | spacer: appends spaces up to the textwidth (default: 78) || |drawit-s| - || | || - ++==============+===========================================================++ - || Function and Explanation || - ++--------------+-----------------------------------------------------------++ - || :call SetDrawIt('vertical','horizontal','crossing','\','/','X','*') || - || set drawing characters for motions for moving || - || and for the ellipse drawing boundary |drawit-setdrawit| || - || default motion || - || | up/down, || - || - left/right, || - || + -| crossing, || - || \ downright, || - || / downleft, and || - || X \/ crossing || - ++=======================+==================================================++ - || Commands | Explanation || - ++-----------------------+--------------------------------------------------++ - || :SetBrush a-z | sets brush (register) to given register || - || :'<,'>SetBrush a-z | yanks visual block to brush |drawit-brush||| || - || :DInrml | switch to normal mode |drawit-nrml| || - || :DIsngl | switch to single-line mode |drawit-sngl| || - || :DIdbl | switch to double-line mode |drawit-dbl| || - \============================================================================/ - - -============================================================================== -3. DrawIt Usage *drawit-usage* {{{1 - -STARTING *drawit-start* {{{2 -\di (starts in normal drawing mode) *drawit-\di* -:DrawIt (starts in normal drawing mode) *drawit-DrawIt* -:DIstart (starts in normal drawing mode) *drawit-DIstart* -:DIstart S (starts in single-bar drawing mode) -:DIstart D (starts in double-bar drawing mode) -:DInrml (starts in normal drawing mode) *drawit-DInrml* -:DIsngl (starts in single-bar drawing mode) *drawit-DIsngl* -:DIdbl (starts in double-bar drawing mode) *drawit-DIdbl* - -Typically one puts <drawit.vim> into the .vim/plugin directory -(vimfiles\plugin for Windows) where it becomes always available. It uses a -minimal interface (\di: you can think of it as *D*raw*I*t or *D*rawIt -*I*nitialize) to start it and (\ds: *D*rawIt *S*top) to stop it. Instead of -using "\" you may specify your own preference for a map leader (see -|mapleader|). - -With a trailing 'S', :DIstart will begin in single-bar mode (see |drawit-sngl|). -With a trailing 'D', :DIstart will begin in double-bar mode (see |drawit-dbl|). -Similarly, :DIsngl and :DIdbl will start DrawIt as well as begin in -single-bar or double-bar mode, respectively. - -A message, "[DrawIt]", will appear on the message line. - - -STOPPING *drawit-stop* {{{2 -\ds -:DIstop -:DrawIt! - -When you are done with DrawIt, use \ds to stop DrawIt mode. Stopping DrawIt -will restore your usual options and remove the maps DrawIt set up. - -A message, "[DrawIt off]", will appear on the message line. - - *drawit-utf16* - *drawit-utf8* *drawit-unicode* -NORMAL, SINGLE BAR, AND DOUBLE BAR MODES *drawit-sngl* *drawit-dbl* -:DInrml :DIsngl :DIdbl - -One may use these commands to start up Drawit in normal, single-bar, or -double-bar modes, respectively. When your |'encoding'| is utf-8 or utf-16, -DrawIt supports drawing with special box characters (single-bar, double_bar). -These commands are also used to switch to normal, single-bar, or double-bar -modes. - - -USER MAP PROTECTION *drawit-protect* {{{2 - -Starting DrawIt causes it to set up a number of maps which facilitate drawing. -DrawIt accommodates users with conflicting maps by saving both maps and user -options and before setting them to what DrawIt needs. When you stop DrawIt -(|drawit-stop|), DrawIt will restore the user's maps and options as they were -before DrawIt was started. - - -OPTIONS *drawit-options* {{{2 - - *g:drawit_insertmode* -g:drawit_insertmode : if this variable exists and is 1 then maps are - made which make cursor-control drawing available - while in insert mode, too. Otherwise, DrawIt's - maps only affect normal mode. - -DRAWING *drawit-drawing* {{{2 - -After DrawIt is started, use the number pad or arrow keys to move the cursor -about. As the cursor moves, DrawIt will then leave appropriate "line" -characters behind as you move horizontally, vertically, or diagonally, and -will transparently enlarge your file to accommodate your drawing as needed. -The trail will consist of -, |, \, / characters (depending on which direction -and SetDrawIt() changes), and + and X characters where line crossings occur. -You may use h-j-k-l to move about your display and generally use editing -commands as you wish even while in DrawIt mode. - -Another tool that may be used to convert Ascii-art into nice pictures is -available at https://github.com/christiangoltz/shaape . - - -CHANGING DRAWING CHARACTERS *drawit-setdrawit* {{{2 - -The SetDrawIt() function is available for those who wish to change the -characters that DrawIt uses. > - - ex. :call SetDrawIt('*','*','*','*','*','*','*') - ex. :call SetDrawIt('-','|','-','\','/','/','*') -< -The first example shows how to change all the DrawIt drawing characters to -asterisks, and the second shows how to give crossing priority to - and /. -The default setting is equivalent to: > - - :call SetDrawIt('|','-','+','\','/','X','*') -< -where SetDrawit()'s arguments refer, in order, to the > - - vertical drawing character - horizontal drawing character - horizontal/vertical crossing drawing character - down right drawing character - down left drawing character - diagonal crossing drawing character - ellipse boundary drawing character -< - -TIP *drawit-tip* - -I have found that sometimes one or more of the <home>, <end>, <pageup>, -and <pagedown> keys give unique sequences but are not interpreted -properly by Vim. This problem impacts DrawIt as it uses those four -keys to signify diagonal moves/drawing. One solution I use is to -put into my <.vimrc> file mapings like: - - map ^V... <home> - -where the ellipsis (...) is the actual character sequence produced by -hitting the key. The way to generate such maps is to type "map ", -followed by three control-v presses, press the associated key, then -a space followed by the proper interpretation sequence (ie. <home>). - - -MOVING *drawit-move* *drawit-moving* {{{2 - -DrawIt supports shifting the arrow keys to cause motion of the cursor. The -motion of the cursor will not modify what's below the cursor. The cursor -will move and lines and/or spaces will be inserted to support the move as -required. Your terminal may not support shifted arrow keys, however, or Vim -may not catch them as such. For example, on the machine I use, shift-up -(<s-up>) produced <Esc>[161q, but vim didn't know that sequence was a <s-up>. -I merely made a nmap: - - nmap <Esc>[161q <s-up> - -and vim thereafter recognized the <s-up> command. - - -ERASING *drawit-erase* {{{2 -<space> - -The <space> key will toggle DrawIt's erase mode/DrawIt mode. When in [DrawIt -erase] mode, a message "[DrawIt erase]" will appear and the number pad will -now cause spaces to be drawn instead of the usual drawing characters. The -drawing behavior will be restored when the <space> key toggles DrawIt back -to regular DrawIt mode. - - -EXAMPLES *drawit-example* {{{2 - -Needless to say, the square spirals which follow were done with DrawIt and -a bit of block editing with Vim: > - - +------------ -----------+ +------------ -----------+ +------------ - |+----------+ +---------+| |+----------+ +---------+| |+----------+ - ||+--------+| |+-------+|| ||+--------+| |+-------+|| ||+--------+| - |||-------+|| ||+------||| |||-------+|| ||+------||| |||-------+|| - ||+-------+|| ||+------+|| ||+-------+|| ||+------+|| ||+-------+|| - |+---------+| |+--------+| |+---------+| |+--------+| |+---------+| - +-----------+ +----------+ +-----------+ +----------+ +-----------+ - -VISUAL BLOCK MODE FOR ARROWS LINES BOXES AND ELLIPSES *drawit-visblock* {{{2 - -\a : draw arrow from corners of visual-block selected region *drawit-a* -\b : draw box on visual-block selected region *drawit-b* -\c : the canvas routine (will query user, see above) *drawit-c* -\e : draw an ellipse on visual-block selected region *drawit-e* -\f : flood figure with a character (you will be prompted) *drawit-f* -\l : draw line from corners of visual-block selected region *drawit-l* -\s : spacer: appends spaces up to the textwidth (default: 78) *drawit-s* - -The DrawIt package has been merged with Sylvain Viart's drawing package (by -permission) which provides DrawIt with visual-block selection of -starting/ending point drawing of arrows (\a), lines (\l), and boxes (\b). -Additionally I wrote an ellipse drawing function using visual block -specification (|drawit-e|). - -One may create a block of spaces for these maps to operate in; the "canvas" -routine (\c) will help create such blocks. First, the s:Canvas() routine will -query the user for the number of lines s/he wishes to have, and will then fill -those lines with spaces out to the |'textwidth'| if user has specified it; -otherwise, the display width will be used. - -Although most of the maps use visual-block selection, that isn't true of the -\f map. Instead, it assume that you have already drawn some closed figure -and want to fill it with some character. - -The Sylvain Viart functions and the ellipse drawing function depend -upon using visual block mode. As a typical use: > - - Example: * \h - DrawIt asks: how many lines under the cursor? 10 - DrawIt then appends 10 lines filled with blanks - out to textwidth (if defined) or 78 columns. - * ctrl-v (move) \b - DrawIt then draws a box - * ctrl-v (move) \e - DrawIt then draws an ellipse -< -Select the first endpoint with ctrl-v and then move to the other endpoint. -One may then select \a for arrows, \b for boxes, \e for ellipses, or \l for -lines. The internal s:AutoCanvas() will convert tabs to spaces and will -extend with spaces as needed to support the visual block. Note that when -DrawIt is enabled, virtualedit is also enabled (to "all"). -> - Examples: - - __ _ *************** +-------+ - \_ _/ **** **** | | - \_ _/ ** ---------> ** | | - \_ _/ **** **** | | - \__/ <------- *************** +-------+ - - \l \a \e and \a \b -< - *drawit-setbrush* -BRUSHES *drawit-brush* {{{2 -> - :SetBrush [a-z] -< - Set the current brush to the selected brush register: -> - ex. :SetBrush b - - :'<,'>SetBrush [a-z] -< - Select text for the brush by using visual-block mode: ctrl-v, move . - Then set the current text into the brush register: (default brush: a) -> - <leftmouse> -< - Select a visual-block region. One may use "ay, for example, - to yank selected text to register a. -> - <shift-leftmouse> -< - One may drag and draw with the current brush (default brush: a) - by holding down the shift key and the leftmouse button and moving - the mouse. Blanks in the brush are considered to be transparent. -> - <ctrl-leftmouse> -< - One may drag and move a selection with <ctrl-leftmouse>. First, - select the region using the <leftmouse>. Release the mouse button, - then press ctrl and the <leftmouse> button; while continuing to press - the button, move the mouse. The selected block of text will then - move along with the cursor. -> - \ra ... \rz -< - Replace text with the given register's contents (ie. the brush). -> - \pa ... \pz -< - Like \ra ... \rz, except that blanks are considered to be transparent. - - Example: Draw the following > - \ \ - o o - * - --- -< Then use ctrl-v, move, "ay to grab a copy into register a. - By default, the current brush uses register a (change brush - with :SetBrush [reg]). Hold the <shift> and <leftbutton> - keys down and move the mouse; as you move, a copy of the - brush will be left behind. - - -DRAWIT MODES *drawit-modes* {{{2 - - -[DrawIt] regular DrawIt mode (|drawit-start|) - -[DrawIt off] DrawIt is off (|drawit-stop| ) - -[DrawIt erase] DrawIt will erase using the number pad (|drawit-erase|) - - g:DrChipTopLvlMenu: by default its "DrChip"; you may set this to whatever - you like in your <.vimrc>. This variable controls where - DrawIt's menu items are placed. - - -============================================================================== -4. History *drawit-history* {{{1 - - 13 Sep 05, 2013 * improved s:Strlen() -- now uses |strdisplaywidth()| - if available. - Sep 13, 2013 * (Paul Wagland) found a case where lines were - being drawn with the wrong character. This - affected the Bresenham-algorithm based - drawing facility (ie. lines and arrows - specified by visual blocks; - |drawit-a|, |drawit-l|). - 12 Nov 16, 2012 * (Alexandre Viau) arrows weren't being drawn. - Fixed. - Nov 29, 2012 * (Kim Jang-hwan) reported that with - g:Align_xstrlen set to 3 that the cursor was - moved (linewise) after invocation. This - problem also afflicted DrawIt. Fixed. - 11 Jan 21, 2010 * (Evan Stern) several places were using - hardcoded drawing characters instead of - b:di_... equivalents. - Feb 22, 2011 * for menus, &go =~# used to insure correct case - Sep 22, 2011 * ctrl-leftmouse (see |drawit-brush|) now moves the - selected text entirely, no longer leaving a copy - of the text where it was initially. - Nov 07, 2011 * included support for utf-8 box drawing characters - Nov 16, 2011 * included support for utf-8 single-double characters - Nov 16, 2011 * included support for cp437 box drawing characters - Dec 06, 2011 * included support for box and line drawing (\b, \l) - support for utf-8 / cp437 box drawing characters - Dec 06, 2011 * fat arrows now use utf-8 characters when available - Jan 30, 2012 * \f supported when using utf-8/cp437 box drawing - characters as boundary characters - 10 Jun 12, 2008 * Fixed a bug with ctrl-leftmouse (which was leaving - a space in the original selected text) - Mar 24, 2009 * :DrawIt starts, :DrawIt! stops DrawIt mode. - Mar 24, 2009 * I've included <script> modifiers to the maps to - cause rhs remapping only with mappings local to - the script (see |:map-script|) - 9 Sep 14, 2007 * Johann-Guenter Simon fixed a bug with s:DrawErase(); - it called SetDrawIt() and that call hadn't been - updated to account for the new b:di_ellipse - parameter. - 8 Feb 12, 2007 * fixed a bug which prevented multi-character user - maps from being restored properly - May 03, 2007 * Extended SetDrawIt() to handle b:di_ellipse, the - ellipse boundary drawing character - * Changed "Holer" to "Canvas", and wrote AutoCanvas(), - which allows one to use the visual-block drawing - maps without creating a canvas first. - * DrawIt implements using the ctrl-leftmouse to move - a visual-block selected region. - * Floods can now be done inside an ellipse - * DrawIt's maps are now all users of <buffer> - 7 Feb 16, 2005 * now checks that "m" is in &go before attempting to - use menus - Aug 17, 2005 * report option workaround - Nov 01, 2005 * converted DrawIt to use autoload feature of vim 7.0 - Dec 28, 2005 * now uses cecutil to save/restore user maps - Jan 18, 2006 * cecutil now updated to use keepjumps - Jan 23, 2006 * :DIstart and :DIstop commands provided; thus users - using "set noremap" can still use DrawIt. - Jan 26, 2006 * DrawIt menu entry now keeps its place - Apr 10, 2006 * Brushes were implemented - 6 Feb 24, 2003 * The latest DrawIt now provides a fill function. - \f will ask for a character to fill the figure - surrounding the current cursor location. Plus - I suggest reading :he drawit-tip for those whose - home/pageup/pagedown/end keys aren't all working - properly with DrawIt. - 08/18/03 * \p[a-z] and \r[a-z] implemented - 08/04/03 * b:..keep variables renamed to b:di_..keep variables - StopDrawIt() now insures that erase mode is off - 03/11/03 * included g:drawit_insertmode handling - 02/21/03 * included flood function - 12/11/02 * deletes trailing whitespace only if holer used - 8/27/02 * fat arrowheads included - * shift-arrow keys move but don't modify - - --------------------------------------------------------------------- -vim:tw=78:ts=8:ft=help:fdm=marker diff --git a/vim/doc/imaps.txt.gz b/vim/doc/imaps.txt.gz deleted file mode 120000 index cf5808b..0000000 --- a/vim/doc/imaps.txt.gz +++ /dev/null @@ -1 +0,0 @@ -/usr/share/vim/addons/doc/imaps.txt.gz
\ No newline at end of file diff --git a/vim/doc/latex-suite-quickstart.txt.gz b/vim/doc/latex-suite-quickstart.txt.gz deleted file mode 120000 index 5ef4db2..0000000 --- a/vim/doc/latex-suite-quickstart.txt.gz +++ /dev/null @@ -1 +0,0 @@ -/usr/share/vim/addons/doc/latex-suite-quickstart.txt.gz
\ No newline at end of file diff --git a/vim/doc/latex-suite.txt.gz b/vim/doc/latex-suite.txt.gz deleted file mode 120000 index 35c3d5a..0000000 --- a/vim/doc/latex-suite.txt.gz +++ /dev/null @@ -1 +0,0 @@ -/usr/share/vim/addons/doc/latex-suite.txt.gz
\ No newline at end of file diff --git a/vim/doc/latexhelp.txt.gz b/vim/doc/latexhelp.txt.gz deleted file mode 120000 index f8197a0..0000000 --- a/vim/doc/latexhelp.txt.gz +++ /dev/null @@ -1 +0,0 @@ -/usr/share/vim/addons/doc/latexhelp.txt.gz
\ No newline at end of file diff --git a/vim/doc/surround.txt b/vim/doc/surround.txt deleted file mode 100644 index 30a642a..0000000 --- a/vim/doc/surround.txt +++ /dev/null @@ -1,205 +0,0 @@ -*surround.txt* Plugin for deleting, changing, and adding "surroundings" - -Author: Tim Pope <http://tpo.pe/> -License: Same terms as Vim itself (see |license|) - -This plugin is only available if 'compatible' is not set. - -INTRODUCTION *surround* - -This plugin is a tool for dealing with pairs of "surroundings." Examples -of surroundings include parentheses, quotes, and HTML tags. They are -closely related to what Vim refers to as |text-objects|. Provided -are mappings to allow for removing, changing, and adding surroundings. - -Details follow on the exact semantics, but first, consider the following -examples. An asterisk (*) is used to denote the cursor position. - - Old text Command New text ~ - "Hello *world!" ds" Hello world! - [123+4*56]/2 cs]) (123+456)/2 - "Look ma, I'm *HTML!" cs"<q> <q>Look ma, I'm HTML!</q> - if *x>3 { ysW( if ( x>3 ) { - my $str = *whee!; vllllS' my $str = 'whee!'; - -While a few features of this plugin will work in older versions of Vim, -Vim 7 is recommended for full functionality. - -MAPPINGS *surround-mappings* - -Delete surroundings is *ds* . The next character given determines the target -to delete. The exact nature of the target is explained in |surround-targets| -but essentially it is the last character of a |text-object|. This mapping -deletes the difference between the "i"nner object and "a"n object. This is -easiest to understand with some examples: - - Old text Command New text ~ - "Hello *world!" ds" Hello world! - (123+4*56)/2 ds) 123+456/2 - <div>Yo!*</div> dst Yo! - -Change surroundings is *cs* . It takes two arguments, a target like with -|ds|, and a replacement. Details about the second argument can be found -below in |surround-replacements|. Once again, examples are in order. - - Old text Command New text ~ - "Hello *world!" cs"' 'Hello world!' - "Hello *world!" cs"<q> <q>Hello world!</q> - (123+4*56)/2 cs)] [123+456]/2 - (123+4*56)/2 cs)[ [ 123+456 ]/2 - <div>Yo!*</div> cst<p> <p>Yo!</p> - -*ys* takes a valid Vim motion or text object as the first object, and wraps -it using the second argument as with |cs|. (It's a stretch, but a good -mnemonic for "ys" is "you surround".) - - Old text Command New text ~ - Hello w*orld! ysiw) Hello (world)! - -As a special case, *yss* operates on the current line, ignoring leading -whitespace. - - Old text Command New text ~ - Hello w*orld! yssB {Hello world!} - -There is also *yS* and *ySS* which indent the surrounded text and place it -on a line of its own. - -In visual mode, a simple "S" with an argument wraps the selection. This is -referred to as the *vS* mapping, although ordinarily there will be -additional keystrokes between the v and S. In linewise visual mode, the -surroundings are placed on separate lines and indented. In blockwise visual -mode, each line is surrounded. - -A "gS" in visual mode, known as *vgS* , behaves similarly. In linewise visual -mode, the automatic indenting is suppressed. In blockwise visual mode, this -enables surrounding past the end of the line with 'virtualedit' set (there -seems to be no way in Vim Script to differentiate between a jagged end of line -selection and a virtual block selected past the end of the line, so two maps -were needed). - - *i_CTRL-G_s* *i_CTRL-G_S* -Finally, there is an experimental insert mode mapping on <C-G>s and <C-S>. -Beware that the latter won't work on terminals with flow control (if you -accidentally freeze your terminal, use <C-Q> to unfreeze it). The mapping -inserts the specified surroundings and puts the cursor between them. If, -immediately after the mapping and before the replacement, a second <C-S> or -carriage return is pressed, the prefix, cursor, and suffix will be placed on -three separate lines. <C-G>S (not <C-G>s) also exhibits this behavior. - -TARGETS *surround-targets* - -The |ds| and |cs| commands both take a target as their first argument. The -possible targets are based closely on the |text-objects| provided by Vim. -All targets are currently just one character. - -Eight punctuation marks, (, ), {, }, [, ], <, and >, represent themselves -and their counterparts. If the opening mark is used, contained whitespace is -also trimmed. The targets b, B, r, and a are aliases for ), }, ], and > -(the first two mirror Vim; the second two are completely arbitrary and -subject to change). - -Three quote marks, ', ", `, represent themselves, in pairs. They are only -searched for on the current line. - -A t is a pair of HTML or XML tags. See |tag-blocks| for details. Remember -that you can specify a numerical argument if you want to get to a tag other -than the innermost one. - -The letters w, W, and s correspond to a |word|, a |WORD|, and a |sentence|, -respectively. These are special in that they have nothing to delete, and -used with |ds| they are a no-op. With |cs|, one could consider them a -slight shortcut for ysi (cswb == ysiwb, more or less). - -A p represents a |paragraph|. This behaves similarly to w, W, and s above; -however, newlines are sometimes added and/or removed. - -REPLACEMENTS *surround-replacements* - -A replacement argument is a single character, and is required by |cs|, |ys|, -and |vS|. Undefined replacement characters (with the exception of alphabetic -characters) default to placing themselves at the beginning and end of the -destination, which can be useful for characters like / and |. - -If either ), }, ], or > is used, the text is wrapped in the appropriate pair -of characters. Similar behavior can be found with (, {, and [ (but not <), -which append an additional space to the inside. Like with the targets above, -b, B, r, and a are aliases for ), }, ], and >. To fulfill the common need for -code blocks in C-style languages, <C-}> (which is really <C-]>) adds braces on -lines separate from the content. - -If t or < is used, Vim prompts for an HTML/XML tag to insert. You may specify -attributes here and they will be stripped from the closing tag. End your -input by pressing <CR> or >. If <C-T> is used, the tags will appear on lines -by themselves. - -If s is used, a leading but not trailing space is added. This is useful for -removing parentheses from a function call with csbs. - -CUSTOMIZING *surround-customizing* - -The following adds a potential replacement on "-" (ASCII 45) in PHP files. -(To determine the ASCII code to use, :echo char2nr("-")). The carriage -return will be replaced by the original text. -> - autocmd FileType php let b:surround_45 = "<?php \r ?>" -< -This can be used in a PHP file as in the following example. - - Old text Command New text ~ - print "Hello *world!" yss- <?php print "Hello world!" ?> - -Additionally, one can use a global variable for globally available -replacements. -> - let g:surround_45 = "<% \r %>" - let g:surround_61 = "<%= \r %>" -< -Advanced, experimental, and subject to change: One can also prompt for -replacement text. The syntax for this is to surround the replacement in pairs -of low numbered control characters. If this sounds confusing, that's because -it is (but it makes the parsing easy). Consider the following example for a -LaTeX environment on the "l" replacement. -> - let g:surround_108 = "\\begin{\1environment: \1}\r\\end{\1\1}" -< -When this replacement is used, the user is prompted with an "environment: " -prompt for input. This input is inserted between each set of \1's. -Additional inputs up to \7 can be used. - -Furthermore, one can specify a regular expression substitution to apply. -> - let g:surround_108 = "\\begin{\1environment: \1}\r\\end{\1\r}.*\r\1}" -< -This will remove anything after the first } in the input when the text is -placed within the \end{} slot. The first \r marks where the pattern begins, -and the second where the replacement text begins. - -Here's a second example for creating an HTML <div>. The substitution cleverly -prompts for an id, but only adds id="" if it is non-blank. You may have to -read this one a few times slowly before you understand it. -> - let g:surround_{char2nr("d")} = "<div\1id: \r..*\r id=\"&\"\1>\r</div>" -< -Inputting text replacements is a proof of concept at this point. The ugly, -unintuitive interface and the brevity of the documentation reflect this. - -Finally, It is possible to always append a string to surroundings in insert -mode (and only insert mode). This is useful with certain plugins and mappings -that allow you to jump to such markings. -> - let g:surround_insert_tail = "<++>" -< -ISSUES *surround-issues* - -Vim could potentially get confused when deleting/changing occurs at the very -end of the line. Please report any repeatable instances of this. - -Do we need to use |inputsave()|/|inputrestore()| with the tag replacement? - -Indenting is handled haphazardly. Need to decide the most appropriate -behavior and implement it. Right now one can do :let b:surround_indent = 1 -(or the global equivalent) to enable automatic re-indenting by Vim via |=|; -should this be the default? - - vim:tw=78:ts=8:ft=help:norl: diff --git a/vim/doc/tags b/vim/doc/tags deleted file mode 100644 index 54ecdda..0000000 --- a/vim/doc/tags +++ /dev/null @@ -1,56 +0,0 @@ -cs surround.txt /*cs* -drawit DrawIt.txt /*drawit* -drawit-DIdbl DrawIt.txt /*drawit-DIdbl* -drawit-DInrml DrawIt.txt /*drawit-DInrml* -drawit-DIsngl DrawIt.txt /*drawit-DIsngl* -drawit-DIstart DrawIt.txt /*drawit-DIstart* -drawit-DrawIt DrawIt.txt /*drawit-DrawIt* -drawit-\di DrawIt.txt /*drawit-\\di* -drawit-a DrawIt.txt /*drawit-a* -drawit-b DrawIt.txt /*drawit-b* -drawit-brush DrawIt.txt /*drawit-brush* -drawit-c DrawIt.txt /*drawit-c* -drawit-contents DrawIt.txt /*drawit-contents* -drawit-dbl DrawIt.txt /*drawit-dbl* -drawit-drawing DrawIt.txt /*drawit-drawing* -drawit-e DrawIt.txt /*drawit-e* -drawit-erase DrawIt.txt /*drawit-erase* -drawit-example DrawIt.txt /*drawit-example* -drawit-f DrawIt.txt /*drawit-f* -drawit-history DrawIt.txt /*drawit-history* -drawit-l DrawIt.txt /*drawit-l* -drawit-manual DrawIt.txt /*drawit-manual* -drawit-modes DrawIt.txt /*drawit-modes* -drawit-move DrawIt.txt /*drawit-move* -drawit-moving DrawIt.txt /*drawit-moving* -drawit-options DrawIt.txt /*drawit-options* -drawit-protect DrawIt.txt /*drawit-protect* -drawit-s DrawIt.txt /*drawit-s* -drawit-setbrush DrawIt.txt /*drawit-setbrush* -drawit-setdrawit DrawIt.txt /*drawit-setdrawit* -drawit-sngl DrawIt.txt /*drawit-sngl* -drawit-start DrawIt.txt /*drawit-start* -drawit-stop DrawIt.txt /*drawit-stop* -drawit-tip DrawIt.txt /*drawit-tip* -drawit-unicode DrawIt.txt /*drawit-unicode* -drawit-usage DrawIt.txt /*drawit-usage* -drawit-utf16 DrawIt.txt /*drawit-utf16* -drawit-utf8 DrawIt.txt /*drawit-utf8* -drawit-visblock DrawIt.txt /*drawit-visblock* -ds surround.txt /*ds* -g:drawit_insertmode DrawIt.txt /*g:drawit_insertmode* -i_CTRL-G_S surround.txt /*i_CTRL-G_S* -i_CTRL-G_s surround.txt /*i_CTRL-G_s* -surround surround.txt /*surround* -surround-customizing surround.txt /*surround-customizing* -surround-issues surround.txt /*surround-issues* -surround-mappings surround.txt /*surround-mappings* -surround-replacements surround.txt /*surround-replacements* -surround-targets surround.txt /*surround-targets* -surround.txt surround.txt /*surround.txt* -vS surround.txt /*vS* -vgS surround.txt /*vgS* -yS surround.txt /*yS* -ySS surround.txt /*ySS* -ys surround.txt /*ys* -yss surround.txt /*yss* |