diff options
| author | Vasil Zlatanov <v@skozl.com> | 2016-12-12 21:51:10 +0000 |
|---|---|---|
| committer | Vasil Zlatanov <v@skozl.com> | 2016-12-12 21:51:10 +0000 |
| commit | 4b6e0102d20d9ab060ce930e4b846c8be446bb06 (patch) | |
| tree | e475eab3716738f2928f0b2063956e9b155f94ab /part_4/ex17/ex17_top.v | |
| download | e2-verilab-4b6e0102d20d9ab060ce930e4b846c8be446bb06.tar.gz e2-verilab-4b6e0102d20d9ab060ce930e4b846c8be446bb06.tar.bz2 e2-verilab-4b6e0102d20d9ab060ce930e4b846c8be446bb06.zip | |
public push
Diffstat (limited to 'part_4/ex17/ex17_top.v')
| -rw-r--r-- | part_4/ex17/ex17_top.v | 48 |
1 files changed, 48 insertions, 0 deletions
diff --git a/part_4/ex17/ex17_top.v b/part_4/ex17/ex17_top.v new file mode 100644 index 0000000..8d804f7 --- /dev/null +++ b/part_4/ex17/ex17_top.v @@ -0,0 +1,48 @@ +module ex17_top (CLOCK_50, SW, HEX0, HEX1, HEX2,
+ DAC_SDI, DAC_SCK, DAC_CS, DAC_LD,
+ ADC_SDI, ADC_SCK, ADC_CS, ADC_SDO, PWM_OUT);
+
+ input CLOCK_50; // DE0 50MHz system clock
+ input [9:0] SW; // 10 slide switches to specify address to ROM
+ output [6:0] HEX0, HEX1, HEX2;
+ output DAC_SDI; //Serial data out to SDI of the DAC
+ output DAC_SCK; //Serial clock signal to both DAC and ADC
+ output DAC_CS; //Chip select to the DAC, low active
+ output DAC_LD; //Load new data to DAC, low active
+ output ADC_SDI; //Serial data out to SDI of the ADC
+ output ADC_SCK; // ADC Clock signal
+ output ADC_CS; //Chip select to the ADC, low active
+ input ADC_SDO; //Converted serial data from ADC
+ output PWM_OUT; // PWM output to R channel
+
+ wire tick_10k; // internal clock at 10kHz
+ wire [9:0] data_in; // converted data from ADC
+ wire [9:0] data_out; // processed data to DAC
+ wire data_valid;
+ wire DAC_SCK, ADC_SCK;
+
+ clktick_16 GEN_10K (CLOCK_50, 1'b1, 16'd4999, tick_10k); // generate 10KHz sampling clock ticks
+ spi2dac SPI_DAC (CLOCK_50, data_out, tick_10k, // send processed sample to DAC
+ DAC_SDI, DAC_CS, DAC_SCK, DAC_LD); // order of signals matter
+ pwm PWM_DC(CLOCK_50, data_out, tick_10k, PWM_OUT); // output via PWM - R-channel
+
+ spi2adc SPI_ADC ( // perform a A-to-D conversion
+ .sysclk (CLOCK_50), // order of parameters do not matter
+ .channel (1'b1), // use only CH1
+ .start (tick_10k),
+ .data_from_adc (data_in),
+ .data_valid (data_valid),
+ .sdata_to_adc (ADC_SDI),
+ .adc_cs (ADC_CS),
+ .adc_sck (ADC_SCK),
+ .sdata_from_adc (ADC_SDO));
+
+ processor ALLPASS (CLOCK_50, data_in, data_out, data_valid); // do some processing on the data
+
+ hex_to_7seg SEG0 (HEX0, data_in[3:0]);
+ hex_to_7seg SEG1 (HEX1, data_in[7:4]);
+ hex_to_7seg SEG2 (HEX2, {2'b0,data_in[9:8]});
+
+endmodule
+
+
|